*mydirectindustry

tank bottom mixer

Product catalog summary

Introduction

The Tank Bottom High Shear Dispersion Emulsifier is designed to be installed at the bottom of kettles. This design addresses spatial constraints and provides an effective solution where conventional high shear emulsifier equipment is unsuitable.

Model Specifications

Model	Power (KW)	Rotation Speed (r/min)	Handling Capacity (L)
TRH-I-80	1.5	2900	20-100
TRH-I-100	2.2	2900	50-300
TRH-I-120	4	2900	100-500
TRH-I-140	5.5 / 7.5	2900	200-800
TRH-I-160	11 / 15	2900	300-1000
TRH-I-180	18.5	2900	500-1500
TRH-I-200	22	1450	800-2000
TRH-I-220	30	1450	1000-3000
TRH-I-240	37	1450	1500-5000
TRH-I-270	55	1450	2000-8000
TRH-I-290	75	1450	3000-10000

Types

Internal-teeth type
Double-teeth type
Internal and external circulation type

Key Points

The emulsifier is optimized for installation at the kettle bottom, solving space limitations.
Wide range of models available to handle capacities from 20 liters up to 10,000 liters.
Power ranges from 1.5 KW to 75 KW with rotation speeds of either 2900 or 1450 r/min depending on the model.
Multiple structural types are offered to suit different processing needs.

Catalog excerpts

合作伙伴 TRH-I TANK BOTTOM HIGH SHEAR DISPERSING EMUL SIFIER Introduction The bottom of kettle high shear 功率（KW） Powe 转速（r/min） Rotatiuon speed 处理量（L） Handing capacity dispersion emulsifier is mainly used to install at the bottom of kettle, which can solve all kinds of space problems and can not get suitable high shear emulsifier equipment effective solution. TRH-I-160 Internalteeth type Doubleteeth type Internal and external circulation type

Open the catalog to page 1