DOUBLE SCREW PARALLEL PUMP 3R!»fFTOii DOUBLE SCREW PARALLEL PUMP Main Parameter Note: The flow rate range in the table refers to the data measured when the medium is "water". The motor power and rotational speed are set according to the actual application conditions. When transporting high - viscosity liquids, a gear reducer can be equipped, or the motor power needs to be increased and the rotational speed needs to be decreased. The data in this table is subject to change without prior notice. The data in this table is for reference only, and the correct parameters shall be subject to the physical product provided. ltk**fa**RFWiiSiy3600rpmProduct Description The XSPXP twin - screw pump offers a series of convincing advantages, which are concentrated to achieve the highest possible cost - effectiveness and production efficiency. In a combined system, we provide pumps of different sizes and screws of different dimensions, covering a conveying range from 40L/h to 150 tons/h, with a maximum particle diameter of 40mm. Different screw sizes enable different flow ranges to be achieved under the same viscosity, pressure, and rotational speed. The XSPXP pump is characterized by the non - contact between the screw and the pump housing. This allows the pump to convey non - lubricating materials or corrosive and polluting materials. When the pump rotates, the two meshing screws form cavities along the pump housing. These cavities are filled with the conveyed medium and transport it from the inlet to the high - pressure outlet. It is highly flexible: The pump is designed in such a way that simply changing the rotation direction of the shaft can reverse the pump, with the inlet becoming the outlet, without any other changes required. The maximum rotational speed of this pump can reach 3600 rpm. 7.S5E&, ft£GMP,3A, FDAS3<oAdvantage1. It can rotate in both forward and reverse directions for conveying. 2. The shaft seal is at the feed port end, enabling the shaft seal to be in an atmospheric pressure state and ensuring the sealing performance when the pump is under high pressure. 3. Strong self * priming ability: up to a vacuum degree lower than - 0.8 bar (when there is material in the pump chamber). 4. Wide range of conveyed media: with a viscosity from 100 - 500000 cst, and it can convey particles up to 40mm in size. 5. Large speed - regulation range: from 100 - 3600 rpm. It can be used not only as a single pump but also as an integrated conveying device. 7. No dead - ends, easy to clean, meeting the requirements of GMP, 3A, and FDA. xspxp jftjesiMMitffc Working Principle The working principle of the XSPXP series twin - screw pump is that in the enclosed cavity of the pump body, two non - contacting screws continuously rotate to generate pressure and convey the medium towards the pump outlet. This axial continuous movement results in a gentle and low - pulse conveyance. It doesn't have the centrifugal force of a centrifugal pump, the squeezing force of a cam - rotor pump, or the reciprocating pulse of a plunger pump. Therefore, it can well protect the integrity of the medium as well as the shape, size, and surface of the product. This twin - screw pump can handle tasks that other positive - displacement pumps can’t. The wide speed range of this pump, up to 3600rpm, enables it not only to handle CIP (Clean - in - Place) and SIP (Sterilize in - Place) operations with a single pump but also to deal with different material viscosities, temperatures, pressures, or other high - efficiency and high - requirement working conditions. Two functions in one pump: Both conveying and cleaning can be carried out within one pump. One pump is sufficient to handle the cyclic steps of CIP and SIP. The advantages of this pump are quite obvious: There is no need for an additional CIP pump or extra pipelines and valves. It reduces space occupation and investment costs.