ZHEJIANG TAISUO TECHNOLOGY CO.,LTD ITEM:TS 01 SERIES/TS 02 SERIES TheTS02series bolt-down thermocouple uses #20 ________ ____- gage (0.032") solid conductors and is available O ———— m wit[1 varjous insulation materials: fiberglass or Teflon. Four standard eyelet sizes are available: i — and 1/4 inch (0.260 hole). In addition to bolting the thermocouple to a wall, it can also be hooked to a traveling conveyor or hung from a ceiling. Available in thermocouple calibrations - Types J, T, K, and E. length of the TS 02series unit is 36 inches, longer in length as well as, stainless steel over braid and various terminations are also available to suit your particular requirement. TheTS 01 series washer thermocouples are designed to measure true average temperature of the washer. Conduction errors are eliminated by welding elements at 180 degrees. • If lead lengths longer than specify length required. • Standard wire insulation is fiberglass, which is good • For other insulation consult • When ordering specify part number by selecting code from each column A through F then add length in inches. specifies a type K Teflon insulated, stainless steel over braid, ungrounded, spade lug unit with a 1/4 inch clearance hole, 120 inches long. • Nextel insulation available Washer Thermocouple Bolt Down Thermocouple

ZHEJIANG TAISUO TECHNOLOGY CO.,LTD Spring or armor adjustable provide wide 0 - 900 degrees Fahrenheit measurement offers a wide range of measurements Five foot standard application reguirements. Fiberglass insulated element offers Larger lengths also available. When ordering, specify style & type.

ZHEJIANG TAISUO TECHNOLOGY CO.,LTD F a x:+86 574 easoesss Thermocouples and extension leads with end preparations offer rapid solutions to many temperature measurement applications at economical costs. They all contain one pair of solid conductors and are insulated with fiberglass over each leg and overall. Thermocouple color codes and premium grade elements are used throughout. Thermocouple types include J, K, E, T, and N. When ordering, specify part number and fill in the four letter blocks thermocouple with spade lugs on cold end, Type K, part number. FtbefglatslnsuUtion • ujndafd Fiber gins...

ZHEJIANG TAISUO TECHNOLOGY CO.,LTD CABLE Thermocouple Assemblies with Leadwire Termination Spring strain relief prevents Mineral Insulation Cable for Long-Lasting Performance i> Lead Wire Rated to 815°C (1500°F) Spring strain relief prevents Stainless Steel Overbraid— Cuts yet Remains Flexible Mineral Insulation Cable for Long-Lasting Performance Miniature male connector with cable clamp attachment designed High Temperature Thermocouple Assemblies with Leadwire Termination Optional Mounting Fitting This exclusive TAISUO' S design provides a practically unbreakable connection between the leadwire...

ZHEJIANG TAISUO TECHNOLOGY CO.,LTD The adjustable probe unit includes an adjustable compression filling with pipe threads. The probe may be from 3/16 inch OD and up, though standard sizes are 1/4 and 3/8 inch. Lengths can be from two inch to as much as 24 inches long, with a standard length of four inches. Probe may be made from most any metal. This style is ideally suited for gas and liquid surface and immersion applications. The surface mounted unit contains the right angle thermocouple on the end of the threaded thermowell. The thermowell is of stainless steel with straight threads (7/16-...

ZHEJIANG TAISUO TECHNOLOGY CO.,LTD High Temperature Operating Temperatures Up to 4200 F (2315°C) Thermocouple Assemblies with Plug/Jack Termination and Support Tube Plug & Jack Assembly An adjustable support tube offers flexibility for immersion adjustment while protecting the sheath from potential damage during installation. The rigid, thick wall offers additional support when penetrating the vessel/furnace wall. Standard polarized plug and jack termination for use with all calibration types. Plug and jack assemblies are made from molded glass filled thermoset compounds and are designed to operate...

Thermocouple ASSEMBLY Standard assembly consists of the metal alloy protection tube with a general purpose aluminum connector head attached. The connector head has a 1/2 inch NPT outlet port. This unit is assembled with a #14 heavy gage ungrounded thermocouple with ceramic insulators and is connected to a two-wire terminal block in the connector head. This unit can be combined with cold leg extension assembly if necessary. For special designs or exposed junctions consult Specify part number, when ordering. design requirements. Typical construction does not allow for bending, contact us if your...