TAISUO Temperature Controller for industry CE/ROSE Certificated
12Pages

DIN-RAIL CONTROLLER NEW modular PID process controller&transmitter Main Features: • PID Autotune DIN Rail controller • Multi input signal: TC, RTD, mA, Volts • Multi output: Relay, SSR logic, mA, Volts • RS485 serial interface MODBUS/RTU protocol • Opto isolated digital input feature • RAMP set-point • Input/Output galvanic isolation • Network or standalone operation • Automatic/Manual operation • Heating/cooling control selectable • Two configurable relay alarms • Second control set-point selectable • Offset input signal selectable • 24Vcc Power output for two wire transmitters General...

DIN-Rail controller TAISUO TECHNOLOGY Setup Input/Output issi on/Serial | Multiple visueli z at ion. | On li; Baud rate Modbus Delay Type Offset * Users set all parameters through this Conf-CH software * The register and coil address is referred in the instruction manual

UNIVERSAL INPUT MODELS UNIVERSAL-INPUT PID process temperature controller Main Features • Independent process and set point displays • Universal input: TC, RTD, mA, Volts • Control output: Relay/SSR/linear output • Two configurable relay alarms • Heating/cooling control selectable Optional Features • RS485 serial interface MODBUS/RTU protocol • Opto isolated digital input feature • RAMP set-point • Automatic/Manual operation • Second control set-point selectable • 24Vcc Power output for two wire transmitters Technical data User configurable for K-J-E-N-T-R-S-B, (integral and differential...

TAISUO TECHNOLOGY niversal input controller Order code Control method Universal input PID control (reverse action) F PID control (direct action) D Heating/cooling PID control (two outputs) W Define factory setting of input/range EX. K07 (thermocouple K input, range 0-1372°C) Relay output Voltage/mA continuous output Relay output ALARM 1 active (see *Alarm mode codes) ALARM 2 active (see *Alarm mode codes) RS 485 interface is active , MODBUS/RTU procotol Power supply Input and Range code Wire connection mA/Volt Logic Input i-wfy provider adapter

MULTI-INPUT PID process temperature controller Main Features • Independent process and set point displays • Control output: Relay/SSR logic ASPDT relay 5A@250VAC, 6A0125VAC relay A+12VDC logic driving SSR, 35mA max. load • One configurable relay alarm • Heating/cooling control selectable • Control method: PID, ON/OFF (integral and differential action can be disabled) • Operating environment Relative humidity 30% to 85% (non-condensing) • Plug-in plastic housing Order code Model code example: TMG-741KW Q-400°C Multi input model, dimension 48X48X 100mm, relay output, one deviation high alarm,...

PROGRAMMABLE THERMOSTAT MULTI-INPUT Programmable thermostat Main Features • Control output: Relay/SSR logic • One configurable relay alarm • Heating/cooling control selectable • Time delay available for cooling control action • Control method: ON/OFF • Operating environment Relative humidity 30% to 85% (non-condensing) • Optional feature + 12Vcc output for power 2 wire transmitter This instrument can be done as a humidity controller. STP322: One main output + one alarm Relay output Deviation high alarm Deviation high/low alarm Process high alarm Band alarm (please specify an input type as...

SINGLE-INPUT PID process temperature controller Main Features Independent process and set point displays Control output: Relay/SSR logic ASPDT relay 5A@250VAC, 6A@125VAC relay A+12VDC logic driving SSR, 35mA max. load One or two configurable relay alarms Order code Heating/cooling control selectable Control method: PID, ON/OFF Operating environment Relative humidity 30% to 85% (non-condensing) Plug-in plastic housing 4 digits display PID controller 3 digits display PID controller Relay output SCR output (shift phrase) SCR output (zero cross) continuous output Deviation high alarm Deviation...

PROGRAMME CONTROLLER PID PROGRAMME temperature controller Main Features ■ Independent process and set point displays ■ PID control with Auto tuning; ON/OFF control ■ Input signals: (specify at ordering) Thermocouple: K/J/E/N/T/S/R/B ■ Main control output: Relay/SSR logic/continuous Volt/mA ■ Selectable heating/cooling control ■ Operating environment: Temperature 0 to 50°C, Relative humidity 30% to 85% (non-condensing) H How does this programme controller work? There are max. 32 segments available in this controller, in each segment, there are two parameters PT(for setting time) and SP (for...

emperature&Humidity controller WH-7000 is an economical instrument with temperature control and humidity control in one unit and independent temperature and humidity digital display. Main Features • Independent process and set point display temperature and humidity values • Temperature sensor input: Pt100 or Cu50 • Humidity sensor should be defined • Control output: Relay/SSR logic/mA continuous ASPDT relay 5AQ250VAC, 6A0125VAC relay A+12VDC logic driving SSR, 35mA max. Load • Basic error • Temperature and humidity sensor could be in one unit, and can be seperated, it's upon cusotmer's •...

JS series is an intelligent timer with many smart modes which are all configurable: When start timing; How the output relays activate; Normal timing or count down; etc. Technical data • Independent process and set point display • Micro processor is applied in the timer • High accuracy, wide time delay range • Bumpless transfer, good quality • Time relay accuracy 0. 01 class ±0. 01 second • Configurable output relays • Normal timing and count down modes selectable • Ambient environment • Terminal wiring types Terminals type, and socket pin type Terminal type Main Features Input signals:...

Voltage regulator TS-V and control panel ABB800 is specially used in blowing machines, patent design and functions enable blowing machines more efficient and automatic. Main Features • Output impulse: breadth value>3V, width^50us (load is 2QQ) • Voltage setting range: 0 to 200V (specials upon request) • Working environment: temperature 0 to 50°C, relative humidity^85% non-corrosive • Power supply: AC 220V±15%, 50Hz±1 Hz; about 3VA • Availalbe dimensions: TSG-V 48X48X88mm; TSA-V 96X96X100mm; TSD-V 72X72X 100mm TSG-2V 48X48X88mm (twin voltage regulator in one unit) TEMPERATURE CONTROL...