Catalogs >
ZheJiang Taisuo Technology Company, Ltd. >
TAISUO PID Programme temperature controller Model TM-N7000P

TAISUO PID Programme temperature controller Model TM-N7000P
1Pages

Catalog excerpts

TAISUO PID Programme temperature controller Model TM-N7000P - 1

PROGRAMME CONTROLLER PID PROGRAMME temperature controller Main Features ■ Independent process and set point displays ■ PID control with Auto tuning; ON/OFF control ■ Input signals: (specify at ordering) Thermocouple: K/J/E/N/T/S/R/B ■ Main control output: Relay/SSR logic/continuous Volt/mA ■ Selectable heating/cooling control ■ Operating environment: Temperature 0 to 50°C, Relative humidity 30% to 85% (non-condensing) H How does this programme controller work? There are max. 32 segments available in this controller, in each segment, there are two parameters PT(for setting time) and SP (for setting set point). The instrument will control the load climbing on the set point within set time. Segment time: (unit: minute) There are 6 segments in this example: SEGMENT ONE: temperature heat to 50X: within 120mins. SEGMENT TWO: temperature heat to 80X: within 120mins. SEGMENT THREE: temperature heat to 110°C within 120mins. SEGMENT FOUR: temperature heat to 160'C within 180mins. SEGMENT FIVE temperature heat to 220'C within 200mins. SEGMENT SIX: temperature heat to 240°C within 240mins. Order code Relay output SCR output (shift phrase) SCR output (zero cross) continuous output Deviation high alarm Deviation high/low alarm Process high alarm Process high/low alarm (define the input signal and range)

Open the catalog to page 1