Pomanique electric insulator CDI series
7Pages

Pomanique Electric Co., Ltd. Rm. 1402, Junhaoxuan, Liuchuan Mansion, Linshi, Yueqing, Zhejiang, 325604, China Tel:(+86)577-62732638 Fax:(+86)577-62732636 E-mail:info@ pomanique.com www.pomanique.com

About Pomanique Brief Pomanique Group was found in 1976, which locates at Wenzhou,Zhejiang Province. Products Range Power transformer from 12kV up to 36kV Fuse cutout from 12kV up to 36kV Surge arrester from 12kV up to 220kV Polymer insulator from 12kV up to 500kV Disconnecting switch 12kV up to 36kV Sales Turnover Around 25 million USD in the year of 2011 Employees 280 employees, including 50 engineers and technician Brief of facilities Silicon rubber Injection machine YHD 200T hydraulic press machine Tensile strength test machine Tensional strength test machine Ability to perform tests...

HIGHEST QUALITYSILCON RUBBERS Are used only for FCI insulators, which gives one of the most important key property of the products. CHEMCAL BONDING Of silicone rubber to metal and FRP-rod. The specially designed guarantees total impenetrability End-fitting/FRP joints are totally embedded in silicone rubber to eliminate imperfections of traditional sealing technology PRE-GRADING COLLAR Of the end-fittings control electrical stress distribution at both ends of the insulators, where most of the environmental stresses are concentrated SPECIAL CRIMPING TECHNOLOGY Has been using, that s why FCI...

Composite deadend insulators CDI series deadend insulators fulfill the requirements of IEC 61109, The sheds of the insulators are made of highly hydrophobic silicon rubber. The core is made of corrosion resistant fiber glass rod and the end fittings are made of hot-dip galvanized steel. They are meant to be used on 12 kV up to 36 kV distribution networks. Rated Voltage Specified Mechanical Load Leakage Distance Power Frequency Dry Flashover Power Frequency Wet Flashover Main technical parameters Rated voltage (KV) Speci?ed mechanical load Lightning impulse withstand BIL(KV) Power frequency...

Post insu iator Line post insulators CDL series line post insulators were designed to be used on long rural lines to provide greater reliability and maintenance free operation. They are now widely used in a varity of pole top configurations to improve the appearance as well as performance of all distribution overhead, rural and urban. Post insulator Rated Speci?ed voltage mechanical (KV) load Lightning impulse withstand BIL(KV) Power frequency withstand (wet)(KV) Rated Voltage Specified Mechanical Load Leakage Distance Power Frequency Wet Flashover

Composite suspension insulators Selection Guide (Line Voltage,kv) P.F withstand Length Leakage Arc 50Hz (kV) L distance distance (mm) (mm) (mm) Dry Wet Lightning impulse. withstand Weight 1,2/50 (kV) (kg) Neg Pos Product Code NOTE: In order to obtain the total length of the insulator(L) with different fittings, please select the kind of fitting end you have to use and refer to the following table: creepage Lightning Shed distance Diameter D/d ithstand (mm) (mm) voltage (kV) Line fitting Ground fitting Specified Mechanical Load Routine Test Load Specified Mechanical Load Routing Test Load...

Selection Guide (Line Voltage,kv) P.F withstand Length Leakage Arc 50Hz (kV) L distance distance (mm) (mm) (mm) Dry Wet Lightning impulse. withstand Weight 1,2/50 (kV) (kg) Neg Pos Selection Guide (Line Voltage,kv) 220 Product Code P.F withstand Length Leakage Arc 50Hz (kV) L distance distance (mm) (mm) (mm) Lightning impulse. withstand 1,2/50 (kV) Weight (kg) NOTE: In order to obtain the total length of the insulator(L) with different fittings, please select the kind of fitting end you have to use and refer to the following table: NOTE: In order to obtain the total length of the...