SPIRAL RETAINING RING <<< SPIRAL RETAINING RING <<< iPBOMCTiMraMwcmm Spiral retaining ring is formed by flat wire winding elastic ring, no lug, no burr, will not interfere with the parts, and different from the traditional stamping process, will not produce waste caused by waste. •No gap - 360°retaining surface *No protruding ears interfere with mating components •The coiling process produces no scrap •Easy installation and removal •No-Charge on custom design ^Standard parts available from 6mm to 400mm • Custom parts available from 2mm to 3000mm 2-turn for bore from stock in carbon and 304 stainless steel: 2-turn for shaft from stock in carbon and 304 stainless steel: PRODUCT INTROOUCTIIN Wave spiral retaining ring is a spiral retaining ring in the form of axial wave.lt is like a standard retaining ring with additional compression characteristics. Stack components that compensate for overall length tolerances while keeping the retaining ring functional. Once assembled, the wave spiral retaining ring will reduce the loosening and vibration of the components. Wave spiral retaining ring from stock in carbon and 63 I stainless steel: