WAVE SPRING <<< WAVE SPRING WITH SHIM ENDS [TEMPERED SPRING STEEL] High carbon tempered spring steel is commonly used for retainer and wave spring. Through the tempering treatment, the tensile strength and yield strength of the material reach the best, with good elasticity. Carbon steel has poor environmental corrosion resistance, and the finished products must be treated with special surface to prevent rust. Generally for black treatment or coated with anti-rust oil treatment. Not recommended for use in acid-base environments. STAINLESS STEEL [SUS304H STAINLESS STEEL] 304H high carbon elastic stainless steel is the common material of spring and retainer ring. After strong cold deformation, high strength and elasticity are obtained. At the same time, it has good oxidation resistance and corrosion resistance. The finished products are generally treated for stress removal at low temperature. [SUS3 I 6 STAINLESS STEEL] 31 6 is nickel-chromium stainless steel and has almost the same mechanical properties as 304H. 31 6 has a higher nickel content and molybdenum content, so its corrosion resistance is stronger than 304H. The finished product is also treated for stress removal at low temperature. [SUS63 I (17-7PH/C)STAINLESS STEEL] 631 is a precipitation-hardened stainless steel with added aluminum element, which has similar corrosion resistance to 304H. It can be strengthened by martensite, cold deformation, precipitation hardening, and obtain high strength and elasticity. Especially suitable for wave spring manufacturing, many applications in fatigue resistance and high stress conditions, the ring is also used more. The elasticity of 1 7-7PH is obtained by dispersion hardening from states C to CH-900, and the finished product does not lose elasticity at 343°C. Wave springs are precise flat wire compression springs that fit into assemblieswhere space is at a premium. Since the overall lengths and operating heights ofwave springs are lower than those of conventional round wire springs, they willoften reduce the size of the spring cavity by as much as 50%. Of course, this will alsoreduce the weight and raw material cost of the assembly. • Save 50% assembly space under the same load • Reduce material usage and save costs • Suitable for axial space restricted • More than 5,000 kinds in stock Multi turn wave spring with plain ends from stock in carbon and 17-7PH stainless steel: This nichcr alloy is used in high temperature corrosive environments and has excellent resistance to vulcanization. The elastic states of two commonly used tempered Inconel X-750 after precipitation hardening heat treatment are listed below: Spring Temper+Aged: The working temperature of finished products in this condition is -200 ° C to 370 ° C No 1 Spring Temper + Aged: The working temperature of the finished product in this condition is -200°C-550°C. It is suitable for processing coil ring and wave spring.