- Catalogs
- ZHEJIANG LEFOO CONTROLS CO., LTD
- LEFOO/LFSV20-B/DRAINAGE SOLENOID VALVE/FOR TANK/ PIPE/DRYING MACHINE
LEFOO/LFSV20-B/DRAINAGE SOLENOID VALVE/FOR TANK/ PIPE/DRYING MACHINE
LEFOO/LFSV20-B/DRAINAGE SOLENOID VALVE/FOR TANK/ PIPE/DRYING MACHINE
- Media: Water
- Media Temperature: -20 to 80°C
- Interval Time: 0.5 to 45 minutes
- Drain Time: 0.5 to 10 seconds
- Available Sizes: 3/8'' or 1/4''
- Working Pressure: 0 to 16 bar
- Ensure the compressed air system is free of impurities such as dirt, copper scale, and rust before installation. Release system pressure for one minute.
- Install the valve vertically in the pipe, ensuring the flow direction matches the arrow on the valve. Avoid using flexible pipes that cannot withstand air impact at the water outlet.
- Verify that the input power matches the voltage indicated on the coil. Do not remove the coil from the valve while powered to prevent coil damage.
- For DC voltage, connect the positive pole to connection “1”.
Catalog excerpts
LEFOO LFSV20-B is a kind of 2/2-way solenoid valve, which is normally closed. It's used for blocking or mobilizing medium in pipe, to discharge condensate water after compress air.The main application of LFSV20-B is filter, separator, drying machine, air tank, drop foot, and other components of compressed air system. The drain time and interval time are adjustable. 1. Before installation, make sure no impurities like dirt, copper scale and rust in the compressed air system, and the system pressure has been released for one minute. 2. Vertically installed into the pipe, the flow direction should be same as arrow in the valve shows, don't use flexible pipe without resistance to air impact in the water outlet 3. Make sure the input power is coincident to the voltage shows in the coil. No permission to remove the coil from valve when power on, to protect coil from burning. 4. The positive pole should be connected with connection “1” when use DC voltage
Open the catalog to page 1
