JC35L35
7Pages

JC35L35 Linear Actuator 1. JC35L35 is a quiet actuator with function of quick release. It is characterized by its fast motor which is up to 8.3mm/s (24V), compact structure of small installation dimension and high protection class of max. IPX6. 2. It is a perfect choice for hospital beds, nursing home beds and other medical equipment. Features And Options Dynamic Load Push(N): Dynamic Load Pull (N): Min. Release Load: Colour: Protection Class: Stroke Length: Installation Dimensions: Noise Level: Hall sensor, Only push, Signal switch Safety nut, Mechanical end stop Limit Switch: Weight: Static Bending Moment: Approval: Built-in (electronic) About 2kg (different stroke length and installation dimensions with different weight ) Lateral load is not allowed IEC60601-1: 2012 EN 60601-1: 2006+A12: 2014 ANSI/AAMI ES60601-1: 2005/(R)2012 and A1: 2012, C1: 2009/(R)2012 and A2: 2010/(R)20

Usage Duty Cycle: Operating Temperature: Reserve Temperature: Supporting Control Box: Relative Humidity: Atmospheric Pressure: 10%, max. continuous work for 2min. and 18 min. off +5℃ to +40℃ -10℃ to +50℃ Matching with JIECANG control box 20% to 90% at 30℃, non-condensing 700 to1060hPa Dimension Front clevis F09, φ 10.1, end clevis

Technical Specifications (Standard Value) Input voltage (VDC) Speed at no load/full load (mm/s) Current at full load (A) Remarks: It can achieve better self-locking ability with Jiecang control box; The above data is the standard value of the test data (inspection specification) at room temperature of 25℃. Diagram of relationship between stroke length and load Characteristic Curve Typical speed Min. speed Typical current Max. current Load capacity(KN) Load capacity(KN)

Ordering Key Take JC35L3503D56D524200/375HGB10SF090021D5 as an example Model Optional features 0 = Quick release + safetynut (standard) P = Only push + quickrelease + safetynut (standard) Y = Hallsensor + quickrelease + safetynut (standard) PY = Only push + Hallsensor + Quickrelease + safetynut (standard) B= signal switch+mechanical end stop Speed at full load Stroke length/ lnstallation dimension H = horizontal V= vertical (to motor direction) Front clevis specification Type of connector and cable Cable length Stroke length = XXX Installation dimension = XXX B10 = slot 6.5, depth 32, hole...

Ordering Details Dimensions of clevis Front clevis F09 Motor Cable power with positive voltage, actuator going down power with positive voltage, actuator going up Outer Circle

5 Pin Din Connector (actuators with Hall sensors) Supporting control boxes: JCB35Q / JCB35T / JCB353R / JCB35R1 / JCB35S power with positive voltage, actuator going down power with positive voltage, actuator going up Hall sensor signal 1 Hall sensor signal 2 Outer Circle 6 Pin Mini-Fit elbow connector Supporting control boxes: JCB35T2 / JCB35T3 When not in the lower limit, it is connected with red power with positive voltage, actuator going down When not in the upper limit, it is connected with yellow power with positive voltage, actuator going up When not in the lower limit, it is...

Communication protocol development Professional customization Intelligent Control of Bluetooth better choices Wireless Communication Latest Weighing System Disclaimer and Exclusion of Liability The user must determine the suitability of JIECANG products under specific conditions. JIECANG is committed to providing the latest product information. However, as JIECANG’ s product are constantly improving, it is possible to make changes to JIECANG’ s product without prior notice. Therefore, JIECANG cannot guarantee the correctness and authenticity of the product information. Although JIECANG will...