Huantai Fastener Catalogue
21Pages

Company Brief Established in 1979,Zhejiang Huantai Fastener Co., Ltd, is a leading manufacturer of customized and non-standard fasteners in China, especially fasteners for water works industry, petrochemical industry，power systems, elevator guide rails(rail clips) and construction. Quality assurance has been our top priority, so we obtained the certificate of ISO9001:2000 quality system as far back as 1999 and some of our products were approved by UL/ULC in 2007. Huantai Fastener is the longest historical and largest manufacturer of T-head bolts and nuts in China. Our T-head bolt exceeds all AWWA C111/A21.11 requirements through combination of high strength and extraordinary ductility. Our water works fastener line is also complemented by flanged joint bolts, bent eye bolts and a variety of fasteners (i.e. track bolts, saddle straps/bales) for pipe repair products, such as couplings, repair clamps, service saddles, and tapping sleeves. Our galvanized square-head machine bolts, double arming bolts, forged eye bolts and lag bolts applied in power systems have become our another main product since 2005. All of these bolts meet ANSI C135.1 and are galvanized per ASTM A-153. In the year of 2007, we started to manufacture high strength fasteners as per ASTM A193 B7/B8/B8M/B16, A194 2H/8/8M and A320 L7, which are widely used in the petrochemical industry. Over 30 years, Huantai’s unparalleled expertise and meticulous commitment to excellence insure that our customers get the finest fastener possible for different industry applications

Zhejiang Huantai Fastener Co., Ltd. Good standardizing practice certificate Certificate for the system of inspection measurement and test

Testing Center Impact Tester Chemical Element Analyzer Chemical Composition Analyze Salt Spray Tester Hardness Tester Tensile Tester

Company View Office building Safe Guarding Room Fasteners Semi-Manufactured Goods Yard Sample Room Company Logo Briefing room Packing Yard Reception desk Meeting Room Material Yard

Waterworks Fasteners Mechanical Joint Accessories Pack Gland: Ductile iron per ASTM A536, Grade 65-45-12. Gasket: SBR per ASTM D 2000 MBA 710, compounded for water and sewer service. Other compounds available on request. T-Bolts and Nuts: UNC T-bolts, heavy hex nuts, high strength, low alloy steel per AWWA C111 Flange Accessory Pack Gasket Materials: Red Rubber / Synthetic Rubber ASTM 13303 Class 2 Non-Asbestos - Fiber Material ASTM F-104 Bolt Sets: Hex Bolts A307 Plain Finish / Hex Nuts A-563 Plain Finish Hex Bolts & Nuts 18-8 or 304 Stainless Steel Hex Bolts A307 Zinc Plated - Hex Nuts...

T head bolts and nuts Standard: AWWA C111/A21.11 Material & Property: High strength low alloy steel; SS304, SS316 are optional. Diameters: 5/8”, 3/4”, 1” and 1-1/4” Length: 3”～9”, Special thread lengths and non-standard lengths available on request T head bolts and Fluorocarbon Coated nuts Standard: AWWA C111/A21.11 Material & Property: SS304, SS316 Diameters: 5/8”, 3/4”, 1” and 1-1/4” Length: 3”～9”, Special thread lengths and non-standard len

Anti-rotation T-bolts and nuts Standard: AWWA Cm/A2U1 Material & Property: ASTM A242, Low carbon alloy steel; SS304, SS316 are optional. Diameters: 5/8”, 3/4”. Length: 3”~5”, Special thread lengths and non-standard lengths available on request Bent eye bolts Standard: AWWA Cm/A2U1 Material & Property: ASTM A242, Low carbon alloy steel. Diameters: 5/8”, 3/4”, and 1” Length: 4”—6”

Track head bolts, High hex nuts Standard: AWWA C111 Neck: Oval neck or Square neck Material & Property: High strength, low alloy, corrosion resistant steel; SS304 or SS316 Other materials or special coatings are available on request. Diameters: 3/8”,1/2”,5/8”,3/4”,7/8” and 1” Length: 2-1/2”～28” . Thread: UNC rolled Track bolts Standard: AWWA C111 Neck: Oval neck or Square neck Material & Property: High strength, low alloy, corrosion resistant steel; SS304 or SS316 Other materials or special coatings are available on request. Diameters: 3/8”,1/2”,5/8”,3/4”,7/8” and 1” Length: 2-1/

Carriage bolts Standard: AWWA C111 Neck: Square neck Material & Property: High strength, low alloy, corrosion resistant steel; SS304 or SS316 Other materials or special coatings are available on request. Diameters: 3/8”,5/8”,3/4”,7/8” and 1” Length: 2-1/2”～28” . Thread: UNC rolled Single-end bolts Specification: UNC rolled thread, stainless steel per ASTM A193, Grade B8/B8M (type 304&316). Diameter: 1/2” and 5/8” Leng

Saddle strap/bale Material: A108-C1018 carbon steel; A276-SS304/SS316; A588 HSLA steel. Form diameter:2.91”～22.25” Width: 3.81”～22.25” Usage: Service Saddles PVC pipe restrainer accessory package Double end studs with heavy hex nuts: HSLA steel 3/4”×17”～40”, in black Hex head bolts with hex nuts: SAE J429 Grade 5; Zinc plated per ASTM F1941 Wash

Double end stud (Restraining Rods) Double end studs with heavy hex nuts: HSLA steel 3/4”×17”～40”, in black All thread rods Material: ASTM A-193 B7/B8/B8M; ASTM A

Power System Fasteners Machine bolts-Square head with square nuts Standard: ANSI C135.1 Galvanized per ASTM A-153 Diameters: 3/8”, 1/2”,5/8”,3/4”, 7/8” and 1” Length:2”～28” Lag bolts Standard: ANSI C135.1 Galvanized per ASTM A-153 Diameters: 1/4”,5/16”,3/8”,1/2” and

Oval eye bolt, thimble eye bolt and shoulder eye bolts Standard: ANSI C135.1 Galvanized per ASTM A-153 Oval eye bolt: Size: 5/8”×6”～20”; 3/4”×8”～18” Shoulder eye bolt: Size:5/8”×8”～12”; 3/4”×8”～20” Thimble eye

Non-Standard fasteners T type forged rail clips Clip size Applied guide rails