• Dimensions: The scissor lift has a maximum working height of 37.00m (121ft 5in) and a platform height of 35.00m (114ft 10in). The overall length is 8.00m (26ft 3in), width is 3.00m (9ft 10in), and height with rails up is 4.20m (13ft 9in) and with rails down is 3.25m (10ft 8in). The platform size is 7.46m x 2.74m (24ft 6in x 9ft) with an extension size of 2.25m (7ft 5in).
• Performance: The lift supports a safe working load (S.W.L) of 750kg (1654lb) both on the platform and extension. It can accommodate 4 occupants indoors and outdoors, with a gradeability of 25%. The travel speed is 2.7km/h (1.68mph) when stowed and 0.2km/h (0.12mph) when raised. The maximum working slope is 2°/3°.
• Weight: The overall weight of the lift is 39800kg (87744lb).
• Power: It is powered by a KUBOTA Z482 engine with 9.8kW, a diesel tank capacity of 130L (34gal), and a hydraulic tank capacity of 600L (159gal). It features an 80V/660Ah lithium battery and an 80V/80A charger.

• Proportional joystick controls and a self-lock gate on the platform.
• Automatic one-way platform extension deck, four-wheel drive, and steering.
• Drivable at full height with an automatic brake system and self-weight lowering system.
• Equipped with a cylinder holding valve, onboard diagnostic system, tilt alarm, and all motion alarm.
• Includes a horn, hour meter, flashing LED beacon, foldable guard rails, and drive enable.
• Manual brake release, lanyard attachment point, tie-down and lifting points.
• Automatic leveling hydraulic outriggers and anti-restart engine protection.
• Emergency stop button, platform load sense system, and manual safety pump.

Address: No.188 Qihang Road, Deqing, Zhejiang P.R.C 313219
Telephone: +86(572)8681688
Email: [email protected]
Website: https://en.cndingli.com

Note: Technical parameters are subject to change without notice due to continuous technology updates. The actual product may vary from the reference picture. All content is copyrighted by Zhejiang Dingli and may not be copied without written permission.