Solenoid Valve D20/D25/D40
5Pages

Instructions Solenoid Valve Model: D20 D25 D45 1. Features D20 series explosion-proof solenoid valve (hereinafter referred to as solenoid valve) is the latest product designed by our company. The solenoid valve body is made of brass forging and has the following characteristics and uses. a. Novel structure and beautiful appearance. b. Zero leakage. c. High flow and small flow to make sure the high accuracy of oil delivery. d. Rated voltage: AC220V/50Hz, AC230V/60Hz, AC110V/50Hz, AC115V/60Hz, DC24V for your choice. · e. Explosion-proof performance, used for computer fuel dispensers. 2. Certification The explosion-proof performance of the solenoid valve conforms to GB3836.1-2010 "Electrical Equipment for Explosive gas environment Part 1: General requirements", GB3836.2-2010 "Electrical equipment for Explosive gas environment Part 2; flameproof type" d ", CNCA-C23-01: 2019 "Implementation Rules for Mandatory Product Certification" and CNEX-C2301-2019 "Detailed Rules for the Certification of Strong Manufactured Products" are made into flast-proof type, and its explosion-proof mark is Ex d IIB T4 Gb. It is suitable for places in Zone 1 and Zone 2 containing explosive gas mixtures of IIA and IIB class T1~T4 groups. The product has passed the inspection of the National explosion-proof Electrical Product Quality supervision and Inspection Center, which has been issued explosion-proof certificate, certificate number is: CNEx15.4019 The product has obtained China national compulsory product CCC certification, certificate number is: 2020312307000140

ATEX Certification

3. Model and explosion-proof mark Description: 3.1 Product model meaning 3.2 Meaning of explosion-proof mark: 4. Technical parameters Model Gasoline, diesel, kerosene High Flowrate Rated voltage Rated power Nominal pressure Ambient temperature

5. Working principle 5.1 working principle This valve is a pilot-operated solenoid valve. which has two movable iron cores, and there are rubber pads at the lower ends of the iron cores. When the upper coil is energized, the upper iron core is sucked up and a small flow channel is opened. When the power is lost, the upper iron core is pressed down by the spring force to close the valve. When the upper coil is energized first to lift the upper iron core, and then the lower coil is energized (or the upper and lower coils are energized at the same time), the lower iron core is lifted up to...

6. Installation and Maintenance 6.1 The medium flow direction in the solenoid valve should be consistent with the direction of the arrow on the valve body, and the power supply voltage and medium pressure should be consistent with those marked on the nameplate. 6.2 The solenoid valve should be connected horizontally and installed on the horizontal pipeline. 6.3 The introduction device of the solenoid valve adopts a permanent four-core cable. The free end of the cable should be properly processed and connected to the corresponding explosion-proof box. The minimum outer diameter of the...