CPS4000 Spiral Wound Gasket 因为更安至， 所以更安fl!\ MORE SAFETY Product Description CPS4000 is a kind of high-performance semi-metal gasket, especially designed for high temperature and high pressure. We adopt the advanced international technology and equipment of spiral wound gaskets and reach an annual capacity of 10 million pieces of gaskets. Metallic Material Material Color Code Carbon Steel CPS雷® 因为更豆至， 所以更豆II!\ —MORE SAFETY MORE AT EASE CPS4000 Spiral Wound Gasket Filler Material Flexible Graphite PTFE Mica/Graphite Ceramics Non- Asbestos vermiculite ► API 6FB ► TA-Luft (VDI2440) ► Customized for low preload stress ► Suitable for ultra-low temperature ► ZHEJIANG CPS CATHAY PACKING&SEALING CO.,LTD. Color Code Light Green Light Blue Note： 1. The table contains the material of the inner ring, outer ring and hoop. 2. Special materials, if required by customers, can be solved through consultation. 3. This table complies with ASME B16.20. 4. The color codes of gaskets are marked on the outer margin of the outer ring. Specification ► Outside Diameter： 20mm~ 4000 mm ► Thickness： 2.5mm ~ 6.5mm （4.5mm ► environments(-196°C) Meet low-leakage valve testing requirements recommended) Width of inner/Outer Rings: Minimum width 5mm Address：Puyang Town Industrial Park, Xiaoshan, Hangzhou, Zhejiang, China Tel：0571-82326953 / 82322888 Fax：0571-82321234 / 82325562 Mail： [email protected] Web：http://www.zjcps.com Warning: The data in this catalog is based on reports from field or laboratory testing and customer feedback. It is not possible to account for all unknown parameters and conditions in practical applications, and we cannot guarantee the universal applicability or accuracy of the recommended data in this catalog. For special working conditions and applications, separate studies and evaluations are required. Please contact our technical department or local sales service office. The limits for pressure, temperature, line speed, and pH values provided in this catalog represent maximum values obtained in testing. For actual applications, note the mutual constraints of working parameters. The maximum value should be set slightly