Aluminium quick-fit compressed air piping network/corrosion resistant/quick installation/minimum pressure drop
10Pages

Email: info@airpipe.com.cn COMPRESSED AIR PIPE SYSTEM

COMPRESSED AIR PIPE SYSTEM SECONDARY PIPELINE SYSTEM PRIMARY PIPELINE SYSTEM

TRANSMISSION TECHNOLOGY Full Performance Industry Revolution Zhejiang Compressed Fluid Transmission Engineering Co.,Ltd was founded in 1997 and has been constantly engaging in air compressor industry and air transmission industry, making products for compressed air pipeline network. We design, manufacture and sell quick connect air piping solutions for compressed air, vacuum and inert gas. air. We specialize in air pipe work systems for new projects, for renovation, extension or modification of existing systems for industrials in Textile, Electronics, Food, Automobiles and Chemicals fileds....

■ High quality and smooth inner surface will never rust. It ensures a stable flow of compressed air and guarantees the safety at the point of use. ■ The high performance of "0" sealing ring ensures excellent seal and no leakage. ■ Fin guide design and the low friction inner surface eliminate the airflow restriction, reducing the pressure drop as much as possible. ■ Full volume flow reduces the pressure drop efficiently. PRESSURE DROP ENERGY COST

The design and use of material of AIRPIPE make itself possess the capability to resist corrosion, vibration, hot temperature and any harsh environment. Therefore the air quality is preserved throughout the whole network up to the point of use, protecting the downstream equipment and the manufacturing process. Step 1 Step 2 \s. Step 3 Common Pipe

AIRPIPE can connect perfectly to the female thread, male thread and flange joints. Equal Flange Male Threaded Nipple Socket Female Threaded Nipple Socket Reducing Flange Total flow design for the valve saves energy and makes quick installation. AIRPIPE CONFIGURATION DIAGRAM The air manifold ( customized onsite) , which can be replaced by DN200 parallel pipeline aircuit can be attached to over 4 branch pipeline. The max diameter for each of the branch pipeline is 200mm, which can

Example: The total length of header piping:500meters, capacity:250m*/hour. working pressures bar. The suitable nominal diameter is DN50 * You can also consult with our engineer to get a suitable proposal AIRPIPE Technical Data Standards Compliance ■ Working Temperature:-20 °C to+70 °C ■ Seamless Aluminum Alloy Pipe ■ Maximum Working Pressue: 13bar ■ All is BSP thread ■ Compatible with any compressor oil ■ Suitable for open-air installation