*mydirectindustry

ONYX 25

Product catalog summary

Overview
The ONYX 25 is a versatile machine designed for processing large printed circuit boards (PCBs) with a width of up to 560 mm and unlimited length. It features an integrated vision system for precise component orientation and a multifunctional hot gas heater head for soldering, component removal, and site cleaning.

Key Features

High placement accuracy of less than 10 µm with integrated force measurement and control via four motorized axes.
2000 watt multifunctional hot gas heater head for various applications including soldering and site cleaning.
Automatic process control with up to eight thermocouple ports for temperature management.
Large board handling capabilities with no length limitation due to open construction.
Bottom pre-heater with a performance of 3500 watts per module, supporting up to two modules.
Automatic closed loop force control for sensitive part protection during processes.
Closed loop gas flow control ranging from 8 to 80 l/min.
MFOV system for viewing components up to 75 x 75 mm with excellent image contrast adjustment.
Semi-automated, contactless site cleaning with a motorized Z-axis.

Application Range

Repairs: Accurate repositioning of misaligned devices and reliable replacement of defective components.
Prototyping: Assembly and soldering of components on small to large PCBs, allowing reuse of expensive components.
Post-assembly: Placement and soldering of missing components or retrofitting individual components.
Assembly: Semi-automated solutions for PCBs with few components.

Technical Specifications

Max board size: 560 mm width, unlimited depth.
Max component height: 20 mm bottom side (optional 30 mm), 30 mm top side (optional 70 mm).
Max component size: 70 x 70 mm.
Gas pressure: 4 – 6 bar.
Hot gas temperature: 20 - 475 °C.
Power requirements: 3 x 400 / 230 VAC, 50 / 60 Hz.
Max power consumption: 6400 VA (+3500 VA per additional pre-heater module).
Dimensions: 898 x 1050 x 1022 mm.
Weight: 150 kg (basic machine).

Contact Information
Vogelherdstrasse 4, 4500 Solothurn, Switzerland
Email: [email protected]
Tel: +41 32 626 20 80
Fax: +41 32 626 20 90

Catalog excerpts

ONYX 25 Repair of large circuit boards

Open the catalog to page 1

Swiss Engineering ONYX 25 The ONYX 25 is used to process printed circuit board with a width up to 560 mm and, thanks to the open construction, with an unlimited length. Due to the integrated vision-system the precise orientation of components is guaranteed. The multifunctional hot gas heater head can be used to solder components, to remove components and for site clean processes (contactless removal of residual solder). In addition many unique options for several additional processes are available. MAIN FEATURES • 2000 watt multifunctional hot gas heater head: Solder components, remove components,...

Open the catalog to page 2

APPLICATION RANGE Repairs Misaligned devices can accurately be repositioned and defective components can reliably be replaced. Prototyping The components of small and extreme large printed circuit boards can be assembled and soldered with the ONYX 25 semi-automatically. It allows already used expensive components to be re-used. Post-assembly Components that are missing at assembly time can be placed and soldered later, or individual components which cannot be handled by the available production machines can be retrofitted with the ONYX 25. Assembly When printed circuited boards with only a few...

Open the catalog to page 3

TECHNICAL DATA Product designation 20 mm bottom side (optional 30 mm), 30 mm top side (optional 70 mm) Angle rotation of heater head Compressed air or nitrogen, 20 - 80 l/min Power requirements

Open the catalog to page 4

ONYX 25

ONYX 25

Catalog excerpts

All ZEVAC AG catalogs and technical brochures