Safety valve zARMAK Fig.775
6Pages

{{requestButtons}}

Catalog excerpts

Safety valve zARMAK Fig.775 - 1

figure ends form threaded angle FULL LIFT SAFETY VALVE zARMAK nominal pressure body material B nodular cast iron nominal diameter FEATURES valves made according to PN EN ISO 4126-1 high tightness heating power engineering air steam other neutral liquids, gases and vapours Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail marketing@zetkama.com.pl www.zetkama.com 1/6

Open the catalog to page 1
Safety valve zARMAK Fig.775 - 2

•for marine type (05, 06, 07, 08) spindle made of: X17CrNi16-2 Data given can be changed without notice. Edition 06/2016 e-mail marketing@zetkama.com.pl

Open the catalog to page 2
Safety valve zARMAK Fig.775 - 3

figure ends form threaded angle * for steam boilers valid are restrictions according to WUDT-UC-WO-M - it is 10bar. Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail marketing@zetkama.com.pl www.zetkama.com

Open the catalog to page 3
Safety valve zARMAK Fig.775 - 4

figure ends form threaded angle DISCHARGE COEFFICIENTS With lift reduction Type of valves For vapours and gases Kdr pressure range (bar) NOTES If condensate accumulates, the blow-out installation should be drainholed in the lowest point. The drainhole in valve's body is made only on special request of the client. In case of liquids, the blow-out installation should be inclined. The valve should be mounted in vertical position. PRESSURE-TEMPERATURE RATINGS Allowed working conditions range PN16 EN-GJS-400-15 5.3106 Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL...

Open the catalog to page 4
Safety valve zARMAK Fig.775 - 5

BASIC DATA OF DETECTOR • Standard length of cable [mm] 2000 • The other executions of detector for special order after co-ordination with manufacturer. • Onto client's wish are used detectors working in range of temperature: -25 ■*■ +230°C. Data given can be changed without notice. e-mail marketing@zetkama.com.pl

Open the catalog to page 5
Safety valve zARMAK Fig.775 - 6

figure ends form threaded angle TYPES body material nodular cast iron EN-GJS-400-15 normal type for gases and vapours sealing metal/metal gas tight type for gases and vapours sealing metal/metal type with reduced lift for liquids sealing metal/metal type with reduced lift, gas-tight sealing metal/metal marine type for gases and vapours sealing metal/metal marine type with reduced lift sealing metal/metal marine type, gas-tight sealing metal/metal marine type with reduced lift, gas-tight sealing metal/metal ORDERING To place an order please use our product number (index) body material ORDER...

Open the catalog to page 6

All ZETKAMA Sp. z o.o. catalogs and technical brochures

  1. zCON 226

    8 Pages

  2. zGAU 708

    6 Pages

Archived catalogs