Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. ZETKAMA Sp. z o.o.
  3. Safety valve zARMAK Fig.630
video corpo

Safety valve zARMAK Fig.630
1 /32Pages

Safety valve zARMAK Fig.630

Safety valve zARMAK Fig.630
1 /32Pages

Catalog excerpts

Safety valve zARMAK Fig.630-1

figure ends form flanged angle FULL LIFT SAFETY VALVE zARMAK body material nominal pressure nominal diameter A grey cast iron C nodular cast iron R acid resistant steel A grey cast iron * Detailed types of valves are listed from page 25 0045 FEATURES flange dimension according to PN EN 1092 valves made according to PN EN ISO 4126-1 high tightness For valve with soft sealing quiet work of valve raised tightness of closure protection of disc sealing surface against a limescale settling as well as against any small mechanical dirt APPLICATION industry MEDIA water (including drinking water) power engineering petrochemical industry steam compressed air neutral fluids aggressive media (suitable to resistance of materials used to building of valves) Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.c

 Open the catalog to page 1
Safety valve zARMAK Fig.630-2

figure ends form flanged angle body material standard type with soft sealing disc with membrane with soft sealing disc lifting bell membrane temperature range * For marine type (05, 06, 07, 08) spindle made of: X17CrNi16-2 o ** Springs with wire diameter up to Φ6 of patent wire, max. working temperature is 250 C o ***For steam boilers are restrictions according to WUDT-UC-WO-M- it is 10 bar and 200 C. Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com 2/32

 Open the catalog to page 2
Safety valve zARMAK Fig.630-3

figure ends form flanged angle Ciśnienie Set pressure początku otwarcia min max min max Ciśnienie Set pressure początku otwarcia min max min max with soft sealing dics 01-2(3), 02-2(3), 03-2(3), 04-2(3), 05-2(3), 06-2(3), 07-2(3), 08-2(3) Set pressure min max *For steam boilers are restrictions according to WUDT-UC-WO-M- it is 10 bar and 200 C. Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com 3

 Open the catalog to page 3
Safety valve zARMAK Fig.630-4

figure ends form flanged angle body material with soft sealing disc with membrane lifting bell temperature range * For marine type (05, 06, 07, 08) spindle made of: X17CrNi16-2 o **Springs with wire diameter up to Φ6 of patent wire, max. working temperature is 250 C Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com 4/32

 Open the catalog to page 4
Safety valve zARMAK Fig.630-5

figure ends form flanged angle DIMENSIONS PN40 body material C (PN40) with soft sealing disc 01-2(3), 02-2(3), 03-2(3), 04-2(3), Ciśnienie Set pressure początku otwarcia min max min max *For steam boilers are restrictions according to WUDT-UC-WO-M- it is 10 bar and 200 C. Ciśnienie Set pressure początku otwarcia min max min max *For steam boilers are restrictions according to WUDT-UC-WO-M- it is 10 bar and 200 C. Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com 5

 Open the catalog to page 5
Safety valve zARMAK Fig.630-6

figure ends form flanged angle for vapours and gases Kdr Type of valves Body material: A, F Type with membrane (01-4, 02-4, 05-4, 07-4) Nominal pressure: PN16, PN40 for vapours and gases Kdr Type of valve DIMENSIONS OF SUPPORTED LUG PN16 AND PN40 Drill of supported lugs only onto client's request Body material: F All types Nominal pressure: PN40 Body material: R All types Nominal pressure: PN40 DN 40 x 65 50 x 80 65 x 100 80 x 125 100 x 150 Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com

 Open the catalog to page 6
Safety valve zARMAK Fig.630-7

figure ends form flanged angle Allowed working conditions range PN16 EN-GJL-250 5.1301 Allowed working conditions range PN40 EN-GJS-400-18 5.3105 Allowed working conditions range PN40 GP240GH 1.0619 Allowed working conditions range PN40 GX5CrNi19-10 1.4303 Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com 7/32

 Open the catalog to page 7
Safety valve zARMAK Fig.630-8

figure ends form flanged angle body material inlet nozzle with soft sealing disc lifting bell temperature range * ex.6303 - up DN 125 GP240GH **ex.6303 - from DN 200 GX5CrNi19-10 ***ex.6303 - from DN 200 GP240GH o **** for temperature under -10 C - nozzle material P355N Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com 8/32

 Open the catalog to page 8
Safety valve zARMAK Fig.630-9

figure ends form flanged angle body material F, PN63, standard type (01-1,02-1, 03-1, 04-1) with insert * if the set pressure makes it possible - on client’s request ** drill of outlet flange for PN 16 *** type with insert for DN > 80, on client’s request For temperatures above 350oC, type with insert is recommended. Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com 9

 Open the catalog to page 9
Safety valve zARMAK Fig.630-10

figure ends form flanged angle DIMENSIONS PN63 body material F, PN63, type with soft sealing disc (01-2(3),02-2(3), 03-2(3), 04-2(3)) * if the set pressure makes it possible - on client’s request Body material: F Standard type (01-1, 02-1, 03-1, 04-1, 05-1, 06-1, 07-1, 08-1) Nominal pressure: PN63 with reduction of leap for vapeurs and gases Kdr Type of valves Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.

 Open the catalog to page 10
Safety valve zARMAK Fig.630-11

figure ends form flanged angle DIMENSIONS OF SUPPORTED LUG PN63 Drill of supported lugs only onto client's request Allowed working conditions range PN63 13CrMo4-5 1.7335 Data given can be changed without notice. ZETKAMA Spółka Akcyjna ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com 11/3

 Open the catalog to page 11
Safety valve zARMAK Fig.630-12

figure ends form flanged angle DIMENSIONS PN100 body material F, PN100, standard type and with soft sealing disc with insert * if the opening pressure makes it possible - on client’s request For temperatures above 350oC, type with insert is recommended. Body material: F All types Nominal pressure: PN100 with reduction of leap for liquids Kdr for vapours and gases Kdr Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail [email protected] www.zetkama.com 12/3

 Open the catalog to page 12

All ZETKAMA Sp. z o.o. catalogs and technical brochures

  1. BALANCING VALVE zSTA
    BALANCING VALVE zSTA

    17  Pages

  2. zCON 226
    zCON 226

    8  Pages

  3. zGAU 708
    zGAU 708

    6  Pages

  4. Control valves zCON 236
    Control valves zCON 236

    14  Pages

  5. Stop valves zGLO 217
    Stop valves zGLO 217

    5  Pages

  6. Liquid level gauges zGAU Fig.716
    Liquid level gauges zGAU Fig.716

    7  Pages

  7. Liquid level gauges zGAU Fig.715
    Liquid level gauges zGAU Fig.715

    7  Pages

  8. Liquid level gauges zGAU Fig.714
    Liquid level gauges zGAU Fig.714

    3  Pages

  9. Liquid level gauges zGAU Fig.713
    Liquid level gauges zGAU Fig.713

    4  Pages

  10. Liquid level gauges zGAU Fig.708
    Liquid level gauges zGAU Fig.708

    4  Pages

  11. Liquid level gauges zGAU Fig.706
    Liquid level gauges zGAU Fig.706

    4  Pages

  12. Rubber expansion joints zJOI Fig.701
    Rubber expansion joints zJOI Fig.701

    4  Pages

  13. Rubber expansion joints zJOI Fig.700
    Rubber expansion joints zJOI Fig.700

    5  Pages

  14. Air release valve zAIR Fig.918
    Air release valve zAIR Fig.918

    5  Pages

  15. Air release valve zAIR Fig.917
    Air release valve zAIR Fig.917

    5  Pages

  16. Gate valve zGAT Fig.021
    Gate valve zGAT Fig.021

    5  Pages

  17. Gate valve zGAT Fig.019
    Gate valve zGAT Fig.019

    5  Pages

  18. Gate valve zGAT Fig.121
    Gate valve zGAT Fig.121

    4  Pages

  19. Gate valve zGAT Fig.111
    Gate valve zGAT Fig.111

    6  Pages

  20. Gate valve zGAT Fig.120
    Gate valve zGAT Fig.120

    4  Pages

  21. Gate valve zGAT Fig.112
    Gate valve zGAT Fig.112

    4  Pages

  22. Liquid level gauges zGAU Fig.720
    Liquid level gauges zGAU Fig.720

    6  Pages

  23. Butterfly valve zBUT Fig.494
    Butterfly valve zBUT Fig.494

    4  Pages

  24. Butterfly valve zBUT Fig.495
    Butterfly valve zBUT Fig.495

    4  Pages

  25. Butterfly valve zBUT Fig.496
    Butterfly valve zBUT Fig.496

    4  Pages

  26. Butterfly valve zBUT Fig.497
    Butterfly valve zBUT Fig.497

    14  Pages

  27. Butterfly valve zBUT Fig.498
    Butterfly valve zBUT Fig.498

    4  Pages

  28. Butterfly valve zBUT Fig.499
    Butterfly valve zBUT Fig.499

    4  Pages

  29. Bottom valve zBOT Fig.935
    Bottom valve zBOT Fig.935

    5  Pages

  30. Float valve zFLO Fig.274
    Float valve zFLO Fig.274

    6  Pages

  31. Float valve zFLO Fig.272
    Float valve zFLO Fig.272

    6  Pages

  32. Static balancing valves zSTA Fig.221
    Static balancing valves zSTA Fig.221

    14  Pages

  33. Stop valve zGLO Fig.215
    Stop valve zGLO Fig.215

    16  Pages

  34. Stop valve zGLO Fig.216
    Stop valve zGLO Fig.216

    12  Pages

  35. Bellow valve zBEL Fig.234
    Bellow valve zBEL Fig.234

    9  Pages

  36. Bellow valve zBEL Fig.235
    Bellow valve zBEL Fig.235

    6  Pages

  37. Bellow valve zBEL Fig.237
    Bellow valve zBEL Fig.237

    5  Pages

  38. Stop valve zGLO Fig.201
    Stop valve zGLO Fig.201

    5  Pages

  39. Check valve zCHE Fig.275
    Check valve zCHE Fig.275

    7  Pages

  40. Check valve zCHE Fig.277
    Check valve zCHE Fig.277

    5  Pages

  41. Check valve zCHE Fig.287
    Check valve zCHE Fig.287

    6  Pages

  42. Check valve zCHE Fig.288
    Check valve zCHE Fig.288

    6  Pages

  43. Check valve zCHE Fig.302
    Check valve zCHE Fig.302

    9  Pages

  44. Check valve zCHE Fig.400
    Check valve zCHE Fig.400

    4  Pages

  45. Check valve zCHE Fig.401
    Check valve zCHE Fig.401

    4  Pages

  46. Check valve zCHE Fig.402
    Check valve zCHE Fig.402

    5  Pages

  47. Control Valve zCON Fig.227
    Control Valve zCON Fig.227

    14  Pages

  48. Check valve zCHE Fig.407
    Check valve zCHE Fig.407

    5  Pages

  49. Check valve zCHE Fig.408
    Check valve zCHE Fig.408

    5  Pages

  50. Backflow preventer zBAC Fig.406
    Backflow preventer zBAC Fig.406

    6  Pages

  51. Backflow preventer zBAC Fig.405
    Backflow preventer zBAC Fig.405

    6  Pages

  52. Safety valve zARMAK Fig.240
    Safety valve zARMAK Fig.240

    16  Pages

  53. Safety valve zARMAK Fig.775
    Safety valve zARMAK Fig.775

    6  Pages

  54. Safety valve zARMAK Fig.782
    Safety valve zARMAK Fig.782

    7  Pages

  55. Safety valve zARMAK Fig.781
    Safety valve zARMAK Fig.781

    10  Pages

  56. Safety valve zARMAK Fig.570
    Safety valve zARMAK Fig.570

    8  Pages

  57. Strainer zSTRA Fig.821
    Strainer zSTRA Fig.821

    13  Pages

  58. Strainer zSTRA Fig.823
    Strainer zSTRA Fig.823

    7  Pages

  59. Ball valve zBAL Fig.565
    Ball valve zBAL Fig.565

    8  Pages

Archived catalogs

  1. Gate valve zGAT Fig.116
    Gate valve zGAT Fig.116

    4  Pages

  2. Gate valve zGAT Fig.115
    Gate valve zGAT Fig.115

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.