Liquid level gauges zGAU Fig.708
4Pages

{{requestButtons}}

Catalog excerpts

Liquid level gauges zGAU Fig.708 - 1

ends form flanged straight LIQUID LEVEL GAUGE - TUBULAR TYPE zGAU body material nominal pressure M acid resistant steel FEATURES connection flanges of liquid level gauge heads are drilled at 40 as for DN 20 and executed with sealing surfaces type E with spline according to PN EN 1092-1 in dependence on location of handles, liquid level gauge heads are assembled in right or left type. When order does not define kind of type, liquid level gauge heads are assembled in right type inlet hole in head Φ 15 mm ability to apply as liquid level gauge for boilers with working temperature up to 200°C APPLICATION water neutral fluids aggressive media (resistance depends on steel grade used) Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail marketing@zetkama.com.pl www.zetkama.com

Open the catalog to page 1
Liquid level gauges zGAU Fig.708 - 2

ends form flanged straight Thread only on client's request body material glass tube flange head screw plug drain cock gland seal connector There is a posiibility to deliever only head sets for liquid level gauge on client's request. Weight of liquid level gauge heads - ca. 5,3 kg Length of pipe should be selected according to following remarks: Axle base [L] 28 mm = length of pipe The maximum axle base [L] - 2000 mm Above L - 1000 mm additional fulcrum is required Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail...

Open the catalog to page 2
Liquid level gauges zGAU Fig.708 - 3

ends form flanged straight CHANGE IN TYPE Change in type of liquid level gauge from right type onto left (or inversely) may be done, through slackening of screws [5] and rotate flange heads about 180°C together with drain cock [4]. SAFETY BALL CHECKS VALVE In case of breakage of glass balls cut off the flow. PRESSURE-TEMPERATURE RATINGS Allowed working conditions range PN16 S275JR Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail marketing@zetkama.com.pl www.zetkama.com 3/4

Open the catalog to page 3
Liquid level gauges zGAU Fig.708 - 4

ends form flanged straight body material standard type with glass tube standard type with auto ball check valve and glass tube M acid resistant steel X6CrNiTi18-10 standard type with glass tube standard type with auto ball check valve and glass tube ORDERING To place an order please use our product number (index) body material ORDER EXAMPLE Liquid level gauge, flanged ends, straight form Standard type with glass tube Data given can be changed without notice. ZETKAMA Sp. z o.o. ul. 3 Maja 12 PL 57-410 Ścinawka Średnia e-mail marketing@zetkama.com.pl www.zetkama.com

Open the catalog to page 4

All ZETKAMA Sp. z o.o. catalogs and technical brochures

  1. zCON 226

    8 Pages

  2. zGAU 708

    6 Pages

Archived catalogs