ZERUST® ICT®510-MSF VCI Masking Film ZERUST®/EXCOR® ICT®510-MSF VCI Masking Film is a pressure-sensitive adhesive film that protects from scratches, dust, and corrosion. In addition, the film removes cleanly and does not leave a residue. Use ZERUST®/EXCOR® ICT®510-MSF VCI Masking Film to protect polished ferrous metal surfaces and parts with voids. This pressure-sensitive adhesive film contains VCI (Volatile Corrosion Inhibitor) chemistry and may be applied directly on metal surfaces to keep them free of corrosion, scratches, and dust. Use the film to protect molds and parts with void spaces while they move among different production stages and storage and shipping. The film clings to vertical surfaces and stays securely in place until it is removed. On removal, ZERUST® ICT®510-MSF is designed to leave the metal surface free of adhesive residue when used indoors and away from direct sunlight and/or heat sources. When used outdoors, an optional UV inhibitor can be added to prevent the degradation of the masking film. However, some adhesive residue may be left on the metal surface due to high-temperature exposure outdoors. Adhesive residues can be removed by solvent wipe down. Application Example Benefits Effective protection from corrosion and environmental contaminants such as dust and dirt Easy to apply and remove Does not leave a residue Provides safe* and ZERUST® VCI protection Application Type Storage Shipping Work in progress ZERUST® 510-MSF VCI Masking Film seals out dust and protects from scratches. In addition, it protects against corrosion using proven ZERUST® Volatile Corrosion Inhibitor technology. *Safe for people. This product does not pose a health hazard to users due to its classification as an article according to EU REACH, UN GHS, US OSHA HazCom and CA WHMIS re

Product Information Description ZERUST®/EXCOR® ICT®510-MSF is a pressure-sensitive adhesive film that may be applied directly on metal surfaces. Typical color is blue. Additional colors are available upon request. Subject to order minimums. Protected Metal Types Protects ferrous metals such as steel, cast iron, and its alloys. Protection Duration Protects clean metals for up to 6 months. Application Temperature Recommended application temperature range of 55° to 90°F (13° to 32°C). Store in original packaging away from direct sunlight in conditions below 85°F (30°C) and 50% RH for up to 2 years...