1. Catalogs
  2. Zerust Corrosion Solutions
  3. Zerust® AxxaWash™ KF-123 Cleaner
video corpo

Zerust® AxxaWash™ KF-123 Cleaner

Zerust® AxxaWash™ KF-123 Cleaner

Zerust® AxxaWash™ KF-123 Cleaner

Product catalog summary
Product Overview
AxxaWash™ KF-123 is a mildly alkaline, aqueous-based cleaner designed for ferrous substrates. It effectively removes light to medium-duty hydrocarbon soils and mitigates chloride. It is suitable for preparing surfaces for long-term rust prevention using products like Zerust® Axxanol™ or Axxatec™. The cleaner can be used as a rinse or dry-in-place solution and acts as a flash-rust inhibitor.

Key Features
  • Contains no phosphates, silicates, alkylphenol ethoxylates, or boron salts.
  • Enhances rust preventative coatings.
  • Low foam above 135°F (57.2°C).
  • Reduces flash-rust and deactivates common anionic contaminants.
  • Not regulated for transport or disposal.

Application Methods
  • Ultrasonic
  • Immersion
  • Spray (low to mid-spray pressures)

Usage Instructions
  • Application temperature: 135 – 150°F (57 – 65.5°C).
  • Dwell time: 1 – 10 minutes.
  • Removability: Purified water (RO/DI).
  • Suggested dosage: 1-10% depending on soil load.

Storage and Handling
  • Store in a cool, dry place away from sunlight.
  • Temperature range: 10 to 130°F (-12 – 54°C).
  • Do not freeze; reseal container after use.
  • Refer to Safety Data Sheet for PPE and handling precautions.

Warranty and Liability
The product is warranted to be free from defects when shipped. Liability is limited to product replacement. Users must determine product suitability and assume all risks. For full warranty details, visit the Zerust® website.

Contact Information
Northern Technologies International Corp, 4201 Woodland Road, Circle Pines, MN 55014, USA. Phone: +1 763.225.6600, Email: [email protected], Website: www.zerust.com
See more

Catalog excerpts

Zerust® AxxaWash™ KF-123 Cleaner-1

Zerust® AxxaWash™ KF-123 Cleaner Zerust®/Excor® AxxaWash™ KF-123 is a low foam cleaner designed for cleaning and where flash-rust inhibition is needed. Benefits Contains no phosphates, silicates, alkylphenol ethoxylates, or boron salts Enhances the effectiveness of rust preventative coatings Designed for ferrous substrates, AxxaWash™ KF-123 is a mildly alkaline aqueous-based cleaner for the removal of light to medium-duty hydrocarbon soils while offering chloride mitigation. AxxaWash™ KF123 is ideally suited to clean and prepare the surface for a long-term rust preventative such as Zerust® Axxanol™ or Axxatec™ product lines. AxxaWash™ KF-123 can be rinsed or used as a dry-in-place cleaner and flash-rust inhibitor. Alternatively, AxxaWash™ KF-123 prepares the surface for long-term water or solvent-based rust inhibitor/preventative. Low foam above 135°F (57.2°C) Reduces flash-rust Deactivates common contaminants Not regulated for transport or disposal Mild alkaline cleaner AxxaWash™ KF-123 is conveniently offered as a liquid concentrate and may be diluted per the application. Speak with your Zerust®/Excor® sales representative to obtain your application-specific operator guide. Application Methods Application Example Ultrasonic Immersion Spray (low to mid-spray pressures) May be used with Zerust® Axxatec™ rust inhibitor or Axxanol™ preventative Zerust® AxxaWash™ KF-123 is used in an immersion system as a final wash, removing light to medium-duty hydrocarbon soils while also

 Open the catalog to page 1
Zerust® AxxaWash™ KF-123 Cleaner-2

Product Information Description Low foam alkaline aqueous-based cleaner with flash-rust inhibitors Apply via ultrasonic, immersion, spray (low to mid-spray pressures) Application temperature 135 – 150°F (57 – 65.5°C) Dilution Ratio As required/See below Dwell time 1 – 10 minutes Removability Purified water (RO/DI) Availability Zerust®/Excor® AxxaWash™ KF-123 is sold as a liquid concentration. Contact your Zerust®/Excor® representative for ordering information. Part Number 350-W-00003PL Collect waste when removing. Dispose of in accordance with local, national, and international regulations. Product...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.