OHLA® Overhung Load Adaptors Series 350 Features • SAE A 2-bolt or 4-bolt Magneto mounting • Heavy Duty Spherical Roller Bearings • May be either Face-mounted or Foot-mounted • Provides a sturdy mounting base for the motor or pump • Supports heavy radial and axial loads – protecting the hydraulic motor or pump • Reduces downtime and maintenance costs • Protects pump or motor shaft seal from harmful contaminants • Other versions with adaptor mounting for DIN, ISO, IEC or NEMA motors Extra-Duty Series Enhancements: Extended Housing • Spherical Roller Bearings Heat-Treated Shaft • Dual NPT Grease Zerks O-Ring Input Seal • Double-Primary Lip Output Seal 350 Series Data Input Standard SAE A 2-bolt mount or 4-bolt Magneto Mount Input Pilot Diameter Input Pilot Depth Input Pilot Sealing Method Input Bore Diameter and Depth 13 tooth 16/32 spline (bore depth 57 mm) 14 tooth 12/24 spline (bore depth 57 mm) Output Shaft Diameter Output Shaft Keyway Output Shaft Keyway Length Output Shaft Length Output Shaft Seal Type Double Primary Lip Seal With Garter Springs Output Pilot Diameter Output Pilot Height Shaft Material Stressproof Steel (1.6523) or an equivalent Bearing Type Spherical Roller Bearing Standard Lubrication Method Optional Lubrication Methods Please consult Zero-Max. Grease Fittings (2) Standard Zerk Fitting Grease Capacity Minimum ca. 35 ml (17.5 ml per grease fitting) Maximum ca. 65 ml (32.5 ml per grease fitting) Grease Type (recommended for typical applications) NLGI #2 Recommended Grease Base Standard Mounting Orientation Shaft Horizontal – Consult Zero-Max for other Mounting Orientations. Maximum Speed Without Modification Housing Material Cast Iron Housing Feet - Threaded Holes Housing Grease Ports Unit Weight

Technical Information (all dimensions in mm) Input End View (6) 1/2"-13 UNC x 25.4 Deep Both Ends on a Ø106.35 Diameter Bolt Circle Bottom View Output Shaft – Keyway 73.15 Input Bore – Keyway 13 Tooth 16/32 Spline