Input Standard Input Pilot Diameter Input Pilot Depth Input Pilot Sealing Method Input Bore Diameter and Depth Output Shaft Diameter Output Shaft Keyway Output Shaft Keyway Length Output Shaft Length Output Shaft Seal Type Output Pilot Diameter Output Pilot Height Shaft Material Bearing Type Standard Lubrication Method Optional Lubrication Methods Grease Fitting Grease Capacity Grease Type (recommended for typical applications) Recommended Grease Base Standard Mounting Orientation Maximum Speed Without Modification Housing Material Housing Feet - Threaded Holes Housing Grease Ports Unit Weight • Deep Groove Ball Bearings • May be either Face-mounted or Foot-mounted • Provides a sturdy mounting base for the motor or pump • Supports heavy radial and axial loads - protecting the hydraulic motor or pump • Reduces downtime and maintenance costs • Protects pump or motor shaft seal from harmful contaminants • Other versions with adaptor mounting for DIN, ISO, IEC or NEMA motors Standard Housing 3.18 mm Deep Pilot (optional) 6.35 mm Buna-N Gasket 25.4 mm keyed (bore depth 58 mm) 19.05 mm keyed (bore depth 71 mm) Double-lip with Garter Spring 82.55 mm Stressproof Steel (1.0762) or an equivalent Deep Groove Ball Bearings Please consult Zero-Max. (1) Standard Zerk Fitting Minimum ca. 15 ml Maximum ca. 30 ml Shaft Horizontal - Consult Zero-Max for other Mounting Orientations. (4) 3/8"-16 UNC x 17.25 mm Press-fit Zerk Fitting

Technical Information (all dimensions in mm) Input End View Side View 69.85 69.85 (Standard Pilot) (Standard Pilot) 73.15 73.15 (Deep Pilot) (Deep Pilot) 69.85 (Standard Pilot) 73.15 (Deep Pilot) 9.53 x 4.76 9.53 x 4.76 Ø38.1 Kwy Kwy 9.53 x 4.76 3.18 (Standard Pilot Depth) 3.18 (Standard Pilot Depth) Kwy 6.35 (Deep Pilot Depth) 6.35 (Deep Pilot Depth) (2) (2) Ø13.5 Thru Holes Ø13.5 Thru Holes 3.18 (Standard Pilot Depth) 6.35 (Deep Pilot Depth) (2) Ø13.5 Thru Holes Ø82.55 Ø82.55 Pilot Bottom ViewPilot Standard 215 Series Data Output Shaft – Keyway Input Bore – Keyway Note: Models with -DP on the...