Catalog excerpts
GSPPipe- / profile granulators • Knives are adjusted outside of the machine • Specially developed deflector wedge • Wide choice of rotors • Well thought out housing design • Strong Welded Steel construction • Oversized outboard bearings Rotor and stator knives are pre-set outside the machine prior to installation in a supplied fixture. This makes awkward adjustment inside the machine unnecessary. The specially angled rotor automatically pulls the fed pipes or profiles into the cutting chamber, this design also regulates the amount of material. The heavy duty bearings are separated from the cutting chamber to avoid lubricants entering the cutting chamber and bearing failure due to material contamination in the bearings. Conventional granulators have substantial problems handling long pipes and profiles. To feed large and bulky parts in most cases cavities or platforms are needed. Therefore ZERMA developed the GSP range. Thanks to the almost level feeding hopper, long pieces can be fed easily. While the machine is operating there is no risk of blocking, in case of congestion no more material will be accepted by the machine until the grinding chamber is empty and the machine will accept material again, and work continues. General Description The Pipe and Profile Granulators of the GSP series are available in rotor widths of up to 1400 mm and diameters ranging from 560 to 700 mm. The completely welded heavy steel cutting chamber is angled and fitted with an extended hopper to allow easy feeding of parts. The standard V-cut creates a high quality regrind with a very low percentage of fines in the output material. Other standard features include an hydraulically opened hopper for outboard bearings reducing the risk of contamination.
Open the catalog to page 1Technical Specifications ZERMA Machinery & Recycling Technology (Shanghai) Co., Ltd 5 Xinjie Rd Xinqiao • Township Ind. Park 201612 • Songjiang • Shanghai • China Phone: +86 21 57645573 • info@zerma.com jpzerma.com Technical changes reserved / Ver. 1 - 04/2019 / EN • Pictures in this brochure may also include optional equipment options.
Open the catalog to page 2All ZERMA Europe GmbH & Co. KG catalogs and technical brochures
-
GSC 700
2 Pages
-
CM G/H/S/Q
20 Pages
-
CM Q
1 Pages
-
CM S
1 Pages
-
CM G/H
1 Pages
-
ZERMA overview
28 Pages
-
ZERMA products all
56 Pages
-
ZXS/ZSS/ZPS/ZIS/ZRS/ZHS
24 Pages
-
GSH
20 Pages
-
GST/GST/GSE
24 Pages
-
ZTS/ZTTS
2 Pages
-
ZHM
2 Pages
-
PM
2 Pages
-
ZRS
2 Pages
-
ZXS
2 Pages
-
ZHS+
2 Pages
-
ZHS
2 Pages
-
ZIS
2 Pages
-
ZSS/ZPS
2 Pages
-
GSH 1100
2 Pages
-
GSH 800
2 Pages
-
GSH 600/700
2 Pages
-
GSH 350/500
2 Pages
-
GST old Series
2 Pages
-
GSC 500
2 Pages
-
GSE 700
2 Pages
-
GSE 500
2 Pages
-
GSE 300
2 Pages
-
GSC 300
2 Pages
-
ZBS Compact shredder
2 Pages
-
Slow speed granulators GSL
11 Pages
-
GSL 300
2 Pages