cyclone for pneumatic conveying
2Pages

{{requestButtons}}

Catalog excerpts

cyclone for pneumatic conveying - 1

tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:9.00pt "Arial", sans-serif; } .font1 { font:10.55pt "Arial", sans-serif; } .font2 { font:30.00pt "Arial", sans-serif; } .font3 { font:6.60pt "Arial Black", sans-serif; } .font4 { font:14.00pt "Impact", sans-serif; } .font5 { font:8.00pt "Microsoft Sans Serif", sans-serif; } .font6 { font:11.40pt "Microsoft Sans Serif", sans-serif; } Cyclone separator Type zas Application Design features ■ maintenance-free due to missing wear parts and drive ■ standard cyclones designed for overpressures up to 100 mbar (g) ■ individually designed to meet customers' spcial requirement ■ welded construction made of aluminium or stainless steel ■ design with vortex chamber including deflection cone in the discharge area ■ support on brackets or on skirt (sp魩cial) ■ venting of the clean gas to atmosphre or via a flange connection into a closed aspiration System ■ individual design to match diff譩rent flange connections Cyclone seperators, type ZAS, are used for the sparation of pellets and powders from the conveying gas downstream pneumatic conveying Systems. The cyclone separators ZAS are d驭signe] to achieve a maximum spara驭tion efficiency. Versions ■ suitable for pneumatic conveying Systems with gas flow rates of approx. 50 m3/h up to 10.000 m3/h ■ suitable for solids to air ratios up to approx. 6 ■ drill pattern of flanges acc. to DIN 2501 PN 10, ANSI 150# or clients standard. Function The function of the cyclone is based on the sparation of the solids from the gas by centrifugal force. The clean gas is vented via the dip pipe at the upper part of the cyclone into the atmosphre or into a down騭stream aspiration Systems. Seperated solids are discharged at the bottom. ZEPPELIN

Open the catalog to page 1

All Zeppelin Silos & Systems catalogs and technical brochures