Temperature sensor for heat and cooling meter
4Pages

Technical data sheet Temperature sensor for heat and cooling meter Temperature sensor pairs with platinum precision resistance for combination with all standard calculators in measuring points for the consumption of heat and cooling energy Temperature sensor pairs serve to determine the supply and return temperature in closed water circults in heating and cooling systems. Depending on the measuring point requirements they can be installed in a sleeve for temperature sensor or directly in the heat carrier. In so-called split heat meters they are connected to an electronic calculator together iwith a flow sensor. For special installation situations and/or large distances between the temperature sensor installation point and the calculator special cable lengths and versions with four-wire connection head are available. All the versions have an MID type testing certificate in accordance with guideline 2014/32/EU and are supplied with a corresponding conformity assessment. Some selected versions also have a domestic type test certificate for cold metering in Germany and a conformity assessment in accordance with the PTD technical guideline K 7.2 PTB. Thus these versions can be used universally for heat and cold metering and therefore offer a substantial logistical advantage. A new kind of temperature sensor type 'Universal 6 x 60 -230' that can be used for all standard sleeves for temperature sensors with an installation length of 50 to 210 mm and an internal diameter of 6 mm. Example: Type universal 6 x 60 - 230

Technical data sheet Temperature sensor for heat and cooling meter Overview for versions with measurement resistance Pt 500 Temperature range: 0 to 150 °C Diameter (mm) DS (Direct Short) 27.5 for heat and cold measurement DS (Direct Short) 38 for heat and cooling measurement PSC (Pocket Short Cable) Universal 6 x 60 - 230 for heat and cold measurement, suitable for: S leeves for temperature sensors 85, 120 and 210 mm with clamping screw S leeves for temperature sensors 100 and 150 mm with ¼"inner thread I nstallation points for temperature sensor type 'DS6' Fitting sleeve for temperature...

Technical data sheet Temperature sensor for heat and cooling meter The range is rounded off with installation accessories such as special ball valves with temperaure sensor mounting M10x1 and stainless steel sleeves for temperature sensors in various lengths. The ball valve with drill bore M10x1 is ideally suited to the installation of direct sensors. If the ball valve is closed then the temperature sensor can be exchanged without draining the heating water. When open the sensor is surrounded by the heat carrier and can react quickly and reliably to changes in temperature. Ball valves...

ZENNER International GmbH & Co. KG Römerstadt 6 | 66121 Saarbrücken | Germany Phone +49 681 99 676-30 Telefax +49 681 99 676-3100 E-mail Internet info@zenner.com www.zenner.com Subject to technical modifications. We accept no liability for any errors or misprints. ZRI_SAP163933_200130_EN Technical data sheet