Smoke alarm EASY PROTECT Radio
2Pages

{{requestButtons}}

Catalog excerpts

Smoke alarm EASY PROTECT Radio - 1

Technical data sheet Smoke alarm EASY PROTECT Radio approved in accordance with DIN EN 14604 The EASY PROTECT Radio smoke alarm was specially developed for use in radio remote reading systems and offers optimum protection. The annual remote inspection via radio saves the annual on-site appointment. Objects in the direct vicinity of the EASY PROTECT radio from 0 to at least 50 cm are detected and documented by the detector’s innovative environment monitoring. Visual detection procedure with additional temperature sensor for reliable identification of all fire classes Built-in, non-removable long-life battery with a service life of 10 years Modern design 130 mm in diameter and 40 mm in depth Test button for muting false alarms and suppressing non-safety-relevant acoustic error messages for up to 65 hours Loud alarm with min. 85 dB (A) Event log with all key equipment parameters Self-monitoring with error signal “Night-time reduction” to lower LED brightness and DIN 14676 application standard which regulates the planning, installation, operation and maintenance of the smoke alarm. ■■ postpone error messages not relevant to safety; CE certified to comply with the Construction Products Directive Test Centre with the certification number 1772-CPR- Field of application according to application standard DIN 14676 and approved according to device standard Wireless M-Bus interface for remote inspection Approved in accordance with DIN EN 14604: 2005, tested and certified by independent testing institute Kriwan however, error readouts after 24 hours at the latest ■■ Approved for the field of application in accordance with Awarded the quality label Q, the detector meets the requirements of vfdb-Directive 14-01 (type testing, manufacturing facility monitoring according to AVCP system). Further information

Open the catalog to page 1
Smoke alarm EASY PROTECT Radio - 2

Technical data sheet Smoke alarm EASY PROTECT Radio LED INDICATOR LIGHT (RED) WITH NIGHT-TIME REDUCTION LED INDICATOR LIGHT (YELLOW) WITH NIGHT-TIME REDUCTION Shows whether the equipment is functioning For differentiation of error signals LARGE TEST BUTTON To test and mute the device SIGNAL GENERATOR ENVIRONMENT/ DISTANCE MONITORING Sensor technology for the detection of objects in the environment from 0 to min. 50 cm, which can obstruct smoke penetration 130 mm 130 mm 130mm Possible status information / error messages Serial number Battery error Error code Smoke chamber pollution...

Open the catalog to page 2

All Zenner InternationalGmbH & Co.KG catalogs and technical brochures

  1. MTKD-M-ST

    2 Pages

  2. MTKD-M-FA

    2 Pages

  3. MTWD-M-CC-ST

    2 Pages

  4. MTWD-M-CC-FA

    2 Pages

  5. MNK-RP-N

    4 Pages

  6. MNK-L-RP-N

    2 Pages

  7. Minomess®

    4 Pages

  8. caltos E

    4 Pages

  9. RNK-RP-N

    4 Pages

  10. multidata

    2 Pages

  11. AMR Systems

    22 Pages

  12. PDC

    4 Pages

  13. caltos E

    4 Pages

  14. Gas Meters

    40 Pages