Technical data sheet MNK-L / MNK-L-N Multi-jet wet dial meters for cold water MNK-L / MNK-L-N is a MID-compliant water meter for service connection. The current state of development guarantees the most precise measurement results, minimal bearing load and a long service life. The MNK-L-N is equipped with a reed switch interface as standard. The interface enables remote reading of the meter data via PDC radio module with LoRaWAN® or wM-Bus (according to OMS). The housing of the MNK-L-N is made of glass-fibre reinforced polymer plastic, drinking water approved and able for an operating pressure up to 16 bar. Illustration MNK-L-N Performance characteristics at a glance ■ Multi-jet wet dial meter For horizontal and vertical installation High-quality mineral glass inspection window (MNK-L) Register cap made of UV-resistant polymer plastic Housing made of glass-fibre reinforced polymer plastic drinking water or service water up to 30 °C Around 50% lighter than a comparable meter with brass – PDC-wireless M-Bus radio module according to OMS- Approved in accordance with MID Model -N is serially equipped with communication interface for PDC-module (PulseDataCapture): For the consumption measurement of cold and clean – PDC- LPWAN-Radio module for LoRaWAN® ■ Retrofittable with pulser

MNK-L / MNK-L-N Technical data Permanent Flowrate Comparable to nominal flow (EEC) Attainable measuring range 1 Comparable to metrological class (EEC) Overload Flowrate Start-up flow rate Display range Temperature range Operating pressure Pulse value (Reed-Pulser or PDC) Pressure loss class at Q3 Mechanical environmental condition Flow profile sensitivity Dimensions and weights: Nominal diameter Width approx. Height approx. Weight approx. Other measuring ranges (R) on request The data refers to the maximum measuring range 3 Condensation possible Attention: not all versions are available in all...