ZEISS DuraMax

Product catalog summary

System Description
The ZEISS DuraMax is a fixed table cantilever Coordinate Measuring Machine (CMM) compliant with ISO 10360-1:2000. It operates in motorized or CNC modes and uses ZEISS CALYPSO and ZEISS GEAR PRO software. The travel speed ranges from 0 to 100 mm/s for axes and up to 520 mm/s for vectors, with maximum acceleration of 1.7 m/s².

Optional Equipment
Various bases and accessories are available, including the ZEISS shopfloor base, which is mandatory for the DuraMax HTG model. The ZEISS rotary table is optional with certain bases, and an automatic workpiece temperature sensor is mandatory for the DuraMax HTG.

Sensors and Accuracy
The CMM specifications are valid with original ZEISS accessories. The ZEISS VAST XXT sensor supports scanning up to 500 points/s. Length measurement errors comply with ISO 10360-2:2009, with specific MPE values depending on temperature ranges. Scanning and form measurement errors comply with relevant ISO standards.

Temperature Behavior
Accuracy is guaranteed within specified temperature ranges, with limits on daily, hourly, and spatial temperature fluctuations.

Rotary Table Specifications
The optional ZEISS rotary table has a weight of approximately 8 kg and supports a maximum central load of 9 kg. It complies with ISO 10360-3:2000 for various axis errors.

Dimensions and Load Capacity
The DuraMax has a measuring range of 500 mm on all axes and supports a maximum load of 100 kg. Overall dimensions vary based on the base used.

Technical Features
The DuraMax uses a glass ceramic length measurement system with a resolution of 0.2 µm. It is protected under IP53 and includes a cast iron clamping device.

Ambient Conditions
The DuraMax operates in relative humidity of 40%-70% and ambient temperatures of 18°C-30°C, with passive vibration damping.

Operational Readiness
Humidity should not exceed 70%, and the ambient temperature range is 10°C-35°C. The electrical power rating is 100-240 V with a maximum consumption of 600 VA.

Approvals and Certifications
The DuraMax complies with EC machine, EMC, and RoHS directives. It is certified under ISO 9001:2008, ISO 14001:2004, and BS OHSAS 18001:2007, with ISO/IEC 17025:2005 accreditation for Russia.

Catalog excerpts

ZEISS DuraMax® Specifications Version: November 2018

Open the catalog to page 1

System description Type according to ISO 10360-1:2000 Operating mode Sensor mounts Software Travel speed Fixed table cantilever CMM Fixed installation ZEISS CALYPSO, ZEISS GEAR PRO Motorized in mm/s Axes 0 to 100 DuraMax DuraMax HTG Customer-specific base ZEISS standard base ZEISS shopfloor base ZEISS rotary table Optional accessory Not possible Optional accessory Not available Optional accessory Mandatory accessory Optional in combination with a ZEISS Not available standard or shopfloor base ZEISS VAST XXT TL1 / TL4 CMM safety position Automatic workpiece temperature sensor Optional accessory...

Open the catalog to page 2

Weight for rotary table / rotary box Measuring system Working range Height Faceplate Dynamics Max. angular velocity Rotation speed Load/torques Torque Max. central load capacity 3) Tilt rigidity Max. permissible tightening torque Accuracy 4) Repeatability of angular position Axial four-axis error MPE complies with ISO 10360-3:2000 Radial four-axis error FR in um 18°C - 22°C 6 Tangential four-axis error FT in um 18°C - 22°C 6 Note: the given dimensions and weights are approximate values. Dimensions in mm. Subject to change. Dimensioning based on DIN 4000-167:2009. 1) Available as an option. We...

Open the catalog to page 3

Dimensions in mmZEISS DuraMax Measuring range Working range (max. workpiece size) Max. load X axis Y axis Z axis Width Length Height Overall CMM dimensions Footprint Working height Assembly space Measuring machine Width Length Height Width Length Height Height Height 1) When using a ZEISS rotary table on the ZEISS DuraMax, including rotary table box. Note: the given dimensions and weights are approximate values. Dimensions in mm. Subject to change. Dimensioning based on DIN 4000-167:2009. If customers use their own base, then a locking mechanism must be used to prevent the DuraMax from slipping!...

Open the catalog to page 4

ZEISS DuraMax HTG Measuring range Working range (max. workpiece size) Max. load with shopfloor base X axis Y axis Z axis Width Length Height Overall machine dimensions Footprint Working height Assembly space Width Length Height Width Length Height Height Height Measuring machine 545 (incl. shopfloor base) Temperature behavior Temperature fluctuations tested and approved Per day in K/d 10.0 under real shopfloor conditions for typical applications Per hour in K/h 3.0 2) Measuring length on ZEISS DuraMax based on typical feature sizes. 3) In compliance with the given temperature behavior and not...

Open the catalog to page 5

Glas ceramic, resolution 0.2 pm, carrier material: Zerodur Length measurement system Glas ceramic, resolution 0.2 carrier material: Robax Controller Based on ZEISS C99L Based on ZEISS C99L Protection class IP53 Protection class IP53 Clamping device Material: cast iron, mounts: 25 M10 threads, 100 mm hole spacing, flatness: in accordance with DIN 876-MI Ambient conditions DuraMax DuraMax HTG Relative humidity 40% - 70% (without condensation) 40% - 70% (without condensation) Floor vibrations ZEISS DuraMax, ZEISS DuraMax RT and ZEISS DuraMax HTG with passive vibration damping. Requirements for operational...

Open the catalog to page 6

ZEISS DuraMax

ZEISS DuraMax

Catalog excerpts

All ZEISS Métrologie et Microscopie Industrielle catalogs and technical brochures