ZEISS CenterMax

Product catalog summary

System Description
The ZEISS CenterMax is a Gantry Coordinate Measuring Machine (CMM) as per ISO 10360-1:2000, operating in motorized/CNC mode with fixed sensor mounts. It utilizes software such as ZEISS CALYPSO, ZEISS GEAR PRO, and ZEISS HOLOS.

Performance Specifications
Acceleration and travel speeds vary, with setup mode speeds ranging from 0 to 70 mm/s and batch measurement mode reaching up to 520 mm/s. The system's accuracy is contingent on using original ZEISS accessories and adheres to ISO 10360 standards.

Accuracy and Measuring Performance
Temperature Variable Accuracy (TVA) and length measurement errors are specified under varying conditions, with compliance to ISO 10360-2:2009. Scanning and form measurement errors are detailed, adhering to ISO 10360-4:2000 and ISO 12181 standards.

Sensors and Measuring System
The system includes ZEISS VAST gold and ZEISS VAST XTR gold sensors, with active measuring capabilities and stylus changers. The scanning rate is up to 500 points/s, with specific force and weight parameters for stylus systems.

Environmental Requirements
Operational readiness is maintained between 8 °C and 40 °C, with specific temperature and humidity conditions to ensure accuracy. The system is equipped with an active damping system to resist vibrations.

Operational Requirements
Electrical power requirements are specified, with options for a computer cabinet to protect PC equipment. Compressed air supply must meet ISO 8573 part 1: Class 4 standards.

Approvals and Certifications
The ZEISS CenterMax complies with EC machine directive 2006/42/EC, EMC directive 2014/30/EU, and RoHS directive 2011/65/EU. It is certified under ISO 9001:2008, ISO 14001:2004, and BS OHSAS 18001:2007, with accreditation to ISO/IEC 17025:2005.

Catalog excerpts

ZEISS CenterMax® Specifications Version: November 2018 ZEISS

Open the catalog to page 1

System description Type according to ISO 10360-1:2000 Operating mode Sensor mounts Software Acceleration Travel speeds Set-up mode Batch measurement mode Acceleration Gantry CMM motorized / CNC Fixed installation ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS Accuracy and measuring performance 1) The CMM specifications are only valid when using original accessories by ZEISS. The specified parameters are observed in the application of the internal test instructions for acceptance testing and in the use of the released standards in accordance with the ISO 10360 series. ZEISS CenterMax TVA 2) (Temperature...

Open the catalog to page 2

ZEISS CenterMax Measuring range Working range (Max. workpiece size) Max. workpiece X axis Y axis Z axis Width Length Height Universal Granite Optional rotary table table table centering capacity (including Overall CMM dimensions Footprint Work- Assembly Trans- Measuring machine Width Length Height Width Length Height Height Height Note: The given dimensions and weights are approximate values. Dimensions in mm. Subject to change. Dimensioning based on DIN 4000-167:2009. 1) Depending on clamping device.

Open the catalog to page 3

Environmental requirements Ambient temperature for operational readiness 8 °C - 40 °C Temperature conditions to guarantee specified accuracies Ambient temperature 15 °C - 40 °C Temperature fluctuations per hour in K/h 2.0 Temperature gradient spatial in K/m 2.0 Relative humidity 40 % to 70 % Optional: up to 85 % in combination with an air conditioner on the computer/controller cabinet. Floor vibrations ZEISS CenterMax is equipped with an active damping system and is therefore highly resistant to vibrations. Please contact us for limiting curves. Upon request, we will perform a vibration analysis....

Open the catalog to page 4

ZEISS CenterMax

ZEISS CenterMax

Catalog excerpts

All ZEISS Métrologie et Microscopie Industrielle catalogs and technical brochures