ZEISS O-DETECT
4Pages

ZEISS O-DETECT Specifications

System description Type according to ISO 10360-1:2000 Operating mode Sensor mounts Fixed installation ZEISS INVENTA D1 (optical) ZEISS ZAPHIRE Dynamic 3/2/2 Travel speed The functionality of the device and its specifications are only achievable when using original accessories by ZEISS. The specified parameters are observed in the application of the internal test instructions for acceptance testing and in the use of the released standards in accordance with the ISO 10360 series. ZEISS INVENTA D1 Optical 2D camera sensor with image processing functionality and autofocus, CMOS monochrome...

Dimensions in mm Measuring range Overall machine dimensions Working range (Max. workpiece size) Basic model With standard base With shopfloor base Table height Assembly clearance Measuring machine Basic model With standard base With shopfloor base Note: the given dimensions and weights are approximate values. Subject to change. Actual appearance of specific sizes may vary from illustration. Dimensioning based on DIN 4000-167:2009. 1) plus 2 × 500 mm assembly clearance. 2) plus 240 mm for control panel storage and 500 mm assembly clearance. 3) With disassembly of the cover parts duri

Requirements for operational readiness Relative humidity Environmental temperature Electrical power rating 3/2/2 1/N/PE 100 - 240V~(+10%); 50-60 Hz; power consumption max. 600 VA; Typical power consumption (thermal load): 130 W; Amount of heat generated max. 2160 kJ/h Environmental requirements 3/2/2 Permissible humidity (without condensation) Environmental temperature Temperature fluctuations spatial Floor vibrations ZEISS O-DETECT is equipped with an integrated vibration damping system and is therefore highly resistant to vibrations. Technical features 3/2/2 Length measurement system...