P R O D U C T P R O F I L E Zebra Machinist Mixers ® Mixers with Lifetime Warranty • Separate water shut-off valve • Machined from solid bronze casting with galvanized steel standpipe • Stainless steel models available for caustic concentrates • Maximum viscosity of 500 SUS • 40” discharge tube included, max length delivery (for longer delivery needs, please refer to the proportioning pump series) • Minimum 25psi needed (75psi max) • Recommended Accessory: Lockout for tampering prevention (#MIXXLOCK) 3 POINT ACCURACY USING FORCE-FLO™ TECHNOLOGY • Machined needle valve • Locknut below dial holds mixing reference • Standpipe check valve keeps mixing chamber loaded Mixer Lockout #MIXXLock Water Limiter (#MIXXWL.1) Model Part Number GPM Mix Range % Mixing Ratios Low High Application Machinist Mixer MIX0327 MIXU0327 MIX03725 MIXU03725 MIX1027 MIXU1027 MIX10725 MIXU10725 3 3 3 3 10 10 10 10 0-7 0-7 0-25 0-25 0-7 0-7 0-25 0-25 100:1 100:1 100:1 100:1 100:1 100:1 100:1 100:1 15:1 15:1 4:1 4:1 15:1 15:1 4:1 4:1 55 gal barrel Pail, barrel, tote 55 gal barrel Pail, barrel, tote 55 gal barrel Pail, barrel, tote 55 gal barrel Pail, barrel, tote Machinist Mixers for caustic concentrates MIX03725SS MIXU03725SS MIX10725SS MIXU10725SS 3 3 10 10 0-25 0-25 0-25 0-25 100:1 100:1 100:1 100:1 4:1 4:1 4:1 4:1 MIXXWL.1 MIXXLOCK MIXSF3 Venturi pumps are commonly used for coolant mixers. The moving water across the coolant orifice creates a low pressure zone drawing coolant into the water stream. The combination of the two laminar flows creates a strong turbulent zone in which the two fluids are thoroughly mixed. Since there are no moving parts, the pump has a very high degree of reliability. The needle valve allows for a high degree of precision for setting the proportion of coolant mixed in with the water. 55 gal barrel Pail, barrel, tote 55 gal barrel Pail, barrel, tote Accessories How It Works Water Limiter, 15-150 adjustable PSI range Lockout for Machinist Mixer to prevent tampering Swivel Fitting for inlet garden hose for 3gpm machinist's mixer Swivel Fitting for inlet garden hose for 10gpm machinist's mixer MIXSF10 Zebra Skimmers Corporation PO Box 833 Chagrin Falls, OH 44022 www.ZebraSkimmers.com www.CoolantMaintenance.com Toll Free 888-249-4855 Phone: 440.349.0141 Fax: 440.349.1211 ©May2010 Zebra Skimmers Corp. All rights reserved. Contact your distributor for more information