EC cabinets - 6 Pages

Add to MyDirectIndustry favorites
EC cabinets

Catalog excerpts

Structure: 1,5 mm thick steel sheet drawn-columns bearing frame; drawn-columns are fixed and welded to die-cast aluminum joints. 25 mm pitch drilling scheme; roof and plinth fixed to structure. Side and back panels: 1,5 mm thick steel sheet; polyurethane sealing gasket; fixed to structure. Internal plate: 2 mm thick galvanised steel sheet (Sendzimir), with front or side installation by means of sliding guides; adjustable depth. Solid door: 1,8 mm thick steel sheet; polyurethane sealing gasket; 20x20 mm pre-drilled tubular frame. 100° standard opening with reversible right hinges. Standard central locking systems with doublecomb tool insert and 4 anchor points. Other configurations are available. Transparent door: Same features as solid door, but it is provided with a tempered glass porthole. BY SEPARATED ORDERING: 1,5 mm thick steel sheet internal door. Cable entry flange: 1,5 mm steel sheet; it consists in 2 or 3 parts, with neoprene cable-tie gasket. Earthing: M6 pins to be welded on structure, doors and panels. Painting: Thermosetting powders. Material: 1,5/1,8 mm thick carbon steel sheet. Standard colours: RAL7035 textured RAL7032 on request Plinth: RAL7009 textured Degree of Protection and Approvals: technical data subject to change without notice 38

 Open the catalog to page 1

1-2 By separated ordering: plinth and sides panels (internal plate is included). APPROVALS EC cabinets Solid Door * IP66 EITH SINGLE, FLAT GROMMET FLANGE Total width with side panels: W+10 mm. In-line setting +2 mm (for each module pair). Weight and Volume: consider DRC tables with the same external dimensions. technical data subject to change without notice

 Open the catalog to page 2

SINGLE SIDE PANEL, in painted sheet. Page 162 SOLID DOOR WITH 180° HINGES. Page 162 HINGED DOORS (PAIR) FOR L800/1000 mm CABINETS. Page 162 LEFT SOLID HINGED DOOR (reversible), in painted sheet. Page 163 INTERNAL DOOR, in painted sheet. Page 164 110°-TURNING FRAME 19"RACK (FOR D=480 mm BASKET), in painted sheet. Page 165 PAIR OF BRACKETS FOR RACK BASKET, in galvanised sheet (Sendzimir). Page 165 SET FOR 180° TURNING FRAME. Page 165 Set for 180° turning frame, for 420 mm Depth drawer. technical data subject to change without notice HE PANELS FOR 19” RACK SYSTEMS, in painted sheet. Page 166

 Open the catalog to page 3

FIXED SUPPORTS ( TO BE FIXED TO CABINET'S STRUCTURE) FOR 19” RACK SYSTEMS (pair), in galvanised sheet (Sendzimir). Pag. 166 PITCH FRAME FOR 19” RACK, in painted sheet. Page 165 CABINETS CONSOLE FOR PRC, EC, KA, VFR, KM CABINET'S DOOR, in painted sheet. Page 164. Painted-sheet DOOR, WITH KEYBOARD AND MOUSE SUPPORTING SYSTEM AND TEMPERED GLASS PORTHOLE. Page 164 INTERMEDIATE JUNCTION PLATE FOR PRC, EC AND KA IN-LINE SETTINGS (with front-installation plate), in galvanised sheet (Sendzimir). Page 166 PARTIAL INTERNAL PLATE, in galvanised sheet (Sendzimir) - TO COMBINE WITH SIDE CROSSBEAMS (4...

 Open the catalog to page 4

SOLID VERTICAL DIVIDING ELEMENT, in galvanised sheet (Sendzimir). Page 168 HORIZONTAL DIVIDING ELEMENT FOR PRC, EC AND KA WITH INTERNAL PLATE, in galvanised sheet (Sendzimir). Page 167 HORIZONTAL DIVIDING ELEMENT FOR PRC, EC AND KA WITHOUT INTERNAL PLATE, in galvanised sheet (Sendzimir). Page 167 REMOVABLE SHELVES ON TELESCOPIC GUIDES, in painted sheet. Page 167 H200 mm GROMMET PLINTH, WITH CLOSED BOTTOM (with no side flanges) FOR PRC CABINETS, in painted sheet. Page 160 FLANGE PAIR FOR H200 mm GROMMET PLINTH, in painted Page 160 LEVELLING FEET, with nylon base and galvanised stem. Pag. 160...

 Open the catalog to page 5

COMPONENT PROTECTION WINDOW, painted sheet FRAME, WITH TRANSPARENT PORTHOLE. Page 169 PRE-DRILLED SIDE CROSSBEAMS, in galvanised sheet (Sendzimir). Page 170 CABINETS PRE-DRILLED FRONT CROSSBEAMS, in galvanised sheet (Sendzimir). Page 170 PRE-DRILLED VERTICAL CROSSBEAMS, in galvanised sheet (Sendzimir). Page 170 PRE-DRILLED BAR FOR DOOR'S INNER PART, in galvanised sheet (Sendzimir). Page 170 PRE-DRILLED BAR TO SUPPORT CABLES FOR PRC, KA, VFR, KM CABINETS in galvanized sheet (Sendzimir) Page 171 CONVERTER SUPPORT PAIR, TO BE INSTALLED IN WIDTH ON PRC, EC AND KA CABINETS, in galvanized sheet...

 Open the catalog to page 6

All Zanardo SpA catalogs and technical brochures

  1. CMC boxes

    1 Pages

  2. VFR cabinets

    6 Pages

  3. Zanardo Spa 2015

    253 Pages