*mydirectindustry

X-NA08A25-E09

Product catalog summary

Overview
Zaber's X-NA-E Series are compact, computer-controlled motorized linear actuators designed for high thrust and speed. They are ideal for replacing standard micrometer heads on manual translation stages and are compatible with Zaber's TSB linear slides.

Key Features

Travel range of 25 and 50 mm with speeds up to 30 mm/s and thrust up to 25 N.
Built-in controller and motor encoder for slip/stall detection and recovery.
Can be daisy-chained with other Zaber products, sharing power through a single supply.
Compact design with a height of only 20 mm, suitable for applications requiring a small profile.
Plug and play setup with easy operation.

Specifications

Microstep Size: 0.047625 µm
Travel Range: 25.4 mm (1.000 ")
Accuracy: 15 µm (0.000591 ")
Repeatability: < 1 µm (< 0.000039 ")
Backlash: < 4 µm (< 0.000157 ")
Maximum Speed: 30 mm/s (1.181 "/s)
Minimum Speed and Speed Resolution: 0.000029 mm/s (0.000001 "/s)
Encoder Resolution: 250 CPR (1,000 states/rev)
Communication Interface: RS-232 with Zaber ASCII and Binary protocols
Power Supply: 24-48 VDC with a maximum current draw of 180 mA
Motor Type: Stepper (2 phase) with 200 steps per revolution
Operating Temperature Range: 0 to 50 °C
Weight: 0.18 kg (0.397 lb)
Compliance: RoHS and CE

Additional Features

Manual control via an optional indexed knob.
Secure connections with locking 4-pin M8 connectors.
Magnetic hall sensor for limit or home sensing.
LED indicators for operational status.
Mounting options include 3/8-32 nut, 3/8" shank, or M3 screws.

Catalog excerpts

Simplifying Motion Control • 25 and 50 mm travel • Up to 30 mm/s speed and up to 25 N thrust • Built-in controller; daisy-chains with other Zaber products • Built-in, 250 CPR, motor encoder provides slip/stall detection and recovery • Designed to replace standard micrometer heads on manual translation stages • Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip) Product Description Please see our TSB linear slides for more information on compatible slides. Zaber's X-NA-E Series devices are computer-controlled, motorized linear actuators with high thrust and speed capabilities and a compact size. They are stand-alone units requiring only a standard 24 V or 48 V power supply. The built-in motor encoder allows closed-loop operation and slip/stall recovery features. An optional indexed knob provides convenient manual control for versatile operation even without a computer. These actuators connect to the RS-232 port or USB port of any computer, and they can be daisy-chained with any other Zaber products. The daisy-chain also shares power, making it possible for multiple X-Series products to share a single power supply. Convenient locking, 4-pin, M8 connectors on the unit allow for secure connection between units. At only 20 mm high, these miniature actuators are excellent for applications where a small profile is required. Like all of Zaber's products, the X-NA-E Series is designed to be 'plug and play' and very easy to set up and

Open the catalog to page 1

Simplifying Motion Control Dimension Drawings

Open the catalog to page 2

Simplifying Motion Control Alternate Unit Microstep Size (Default Resolution) Built-in Controller Travel Range Accuracy (unidirectional) Repeatability Backlash Maximum Speed Minimum Speed Speed Resolution Encoder Resolution Encoder Type Peak Thrust Communication Interface Communication Protocol Maximum Current Draw Power Supply Power Plug Motor Steps Per Rev Motor Type Inductance Default Resolution Data Cable Connection Mechanical Drive System Limit or Home Sensing Manual Control Axes of Motion LED Indicators Mounting Interface Vacuum Compatible Operating Temperature Range RoHS Compliant CE Compliant 0.047625...

Open the catalog to page 3