Z-LASER develops in close cooperation with leading manufacturers of medical technology laser sy-stems, modules and building blocks for patient positioning in diagnostic imaging and tumour therapy. > Iso-Center Laser Image Amplifier LaserX-Ray Source Laser > Application: Patient Positioning Retrofit: Laser Light Visor Building block: Ring with mini laser modules Snap-closing metal bandMetal band length dependent on diameter of the image amplifierFlat ring with integrated lasers with asymmetric line optics. Thickness only 0.591 inch / 15 mm Ring dia- meter and fixing dependent on image amplifier designBattery operation with auto-off5 VDC operation, customer specific connector Individual line correction by line shifter techno-logy to compensate position dependent c-arm bendingPre-adjusted line lasers including control electronics ready for system integration.The center of the cross is always - distance independent - in the center axis of the c-arm >

Application: The laser cross is aligned with a lead cross on the image amplifier to assist the surgeon: The cross in the x-ray image and the laser cross show the same position. Building block: Complete Laser Assembly with mechanical fine adjustment The center of the cross is always - distance independent - in the center axis of the c-arm > Application: Exact height positioning of the patient in the iso-center of the C-arm. Building block: Retractable battery operated line projector Fixing dependent on c-arm designBattery operation with auto off, programmable in steps of 30 seconds Default value:...

Patient positioning in 3 dimensions Laser modules for integration into the gantry for 3-dimensional patient positioning Laser class 1 line projector with 90 fan angleStands temperatures up to 60аC / 140 F 5 VDC operation, connector customer specific Application: > Patient positioning High accuracy, hand focusable point laser with precision bracket Gantry of a proton therapy system(in construction) Gantry diameter ~ 5 m/ 15 ft.Coaxial aligned laser.Point position is independent from adjusted focus5 VDC operation >