Crude Oil Sampling System Field-Proven Design, Reliable Results Crude oil sampling systems are designed to capture and combine thousands of individual samples into a representative, composite sample of single-phase liquids in the flowing pipeline. Operation of the system centers on a sample pump and electric control system. All equipment, except for the pump, are skid mounted. The systems can operate in proportional-to-flow or time-based injection modes. With 60 years of experience, the system’s quality is field-proven, delivering a reliable representative sample day-after-day, year-after-year. Features and Benefits • Positive displacement pump with integral balance feature mounted directly to the pipeline • Single or multi-vessel sample accumulators to deliver accurate injection for the application • Electronic controller for proportional-to-flow or time-based operation • Factory assembled and skid or cabinet mounted for ease of installation Options • Direct or remote mounted sample pumps • Sample accumulator capacities: 5, 10, 20, 30 gallon • Acutation: punematic or hydraulic • Severe service elastomers jAt temperatures below 0°C (32°F) conditioning of the actuation gas supply may be required. Operation at extreme temperatures may affect system performance. © 2015 Accudyne Industries. All rights Reserved. 1 an Accudyne Industries brand

an Accudyne Industries brand System Schematic CNR-2 SAMPLE PUMP (FROM SKID) PRODUCT TO SAMPLE VESSEL ISOLATION VALVE SAMPLE PROBE PIPELINE FULL OPENING LID w/ REVERSE BEVEL SEAL PRESSURE GAUGE SIGHTGLASS ISOLATION VALVE 5 GALLON CRUDE OIL ACCUMULATOR VESSEL SIGHTGLASS GUARD ROB VALVE SIGHTGLASS ISOLATION VALVE MIXING VALVE MANUAL ON/OFF SWITCH FOR MIXING SYSTEM MIXING PUMP w/ MOTOR © 2015 Accudyne Industries. All rights Reserved. XP ELECTRICAL ENCLOSURE w/ TIME DELAY RELAY 4-20mA IN BY CUSTOMER MIXING VALVE RELIEF VALVE HYDRAULIC POWER PACK STATIC MIXER DRAIN VALVES