The AT xx - model intended to cut tubes and stiff profiles, by assuring a high precision thanks to the moving cutter's head which follows the product motion at the same speed. This mode of cutting is well adapted in particular to the breakable materials which would risk to burst at the time of the cutter impact with any other devices. Stiff welded frame Motion of the trolley by pneumatic device or motorized system synchronized at the extrusion speed of the product. Entry adjustable Guides (2 on side - 1 vertical) - fixed exit guide Tightening of the tube / profiles by machined clamps fitted on pneumatic jack. (profil to specify with order) Measure of length by encoder wheel - length indicator and batch counter. Blade rotation by an asynchronous motor with fixed or variable speed. Machine pre-equipped for the collect of material chip. MAIN CARACTERISTICS Model AT 60 - S AT 90 - S AT 125 - S Max cutting section (profiles) 70 x 140 90 x 160 100 x 200 Max cutting section (tubes) ∅ 60 mm ∅ 90 mm ∅ 125 mm 750 W 1100 W 1500 W Motor power Table height Overall dimensions (L x l x h) 960 to 1010 mm 1690 x 950 /1150 x 1350 mm OPTIONS • Special saw blades (diamonded, special profile of teeth, other dimensions) • Special clamping • Industrial chip extractor YVROUD - Etablissement principal :114, rue du Faubourg St Jean 45000 ORLEANS – France Tél : + 33 (0) 238 728 120 – Fax : + 33 (0) 238 728 125 E-mail : [email protected] - Web Site : www.yvroud.net