Single phase 100A latching relay TP41-30

1 / 3 PagesView full catalog

Single phase 100A latching relay TP41-30

Product catalog summary

Technical Specifications:

Coil Data: Rated coil voltages available are 6V, 9V, 12V, 24V, and 48V. Pulse time is less than 3 ms at nominal voltage, with a maximum pulse width of 50 ms.
Power: Rated power is 2W for single coil and 1.5W for double coil configurations.
Contact Material: AgSnO2 with a maximum contact resistance of 1.0mΩ.
Switching Capabilities: Maximum switching voltage is 253 VAC, current is 100A, and power is 19800VA.
Life Expectancy: Mechanical life is 51×10⁴ operations, and electrical life is 41×10⁴ operations.

Ordering Information:

Available in single or double coil types, with magnetic latching relay options.
Customized shunt and copper braid cables available.

Environmental and Construction Details:

Complies with ROSH for environmental protection.
Insulation resistance is 1000MΩ, with dielectric strength of 4000V between contact and coil, and 2000V between open contacts.
Shock resistance is 147m/s², and vibration resistance is 10HZ-55HZ with amplitude of 1.5mm.
Ambient temperature range is -40℃ to +85℃, with approximate weight of 80g and dust protection construction.

Additional Notes:

Relay contact default status is closed (reset); may change to open during transit or mounting.
Ensure excitation voltage reaches rated voltage without exceeding 1 minute.
Do not apply voltage to both coils simultaneously in double coil relays.
Terminals without twisted copper cable should not be tin soldered or wrenched.
Relays tested for electrical endurance should not be reused.

Catalog excerpts

Single phase 100A latching relay TP41-30-1

Relay Technical Data Single phase 100A latching Relay TP41-30 Description ● Single Phase 100A Switching Capability; ● Multi-layer blades, Low temperature rise; ● Low contact resistance; ● Customized shunt, copper braid cables; ● Environment protection (Comply with ROSH); Contact Material: AgSnO 2 Part No.: Single phase 100A Switching D: Double Coil S: Single Coil Type: Magnetic latching relay Technical Data Coil data Rated coil voltage Single Coil Double Coil pulse Width pulse time Contact data Contact data ContactMaterial: Contact Contact arrangement Contact Resistance: Mechanical Life Electrical Life

Open the catalog to page 1

Single phase 100A latching relay TP41-30-2

Standard windings Operating voltage range MAX. (VDC) Nominal voltage (VDC) Single Winding Double Winding NOTE: Others norminal voltage required, special ordering allowed. Characteristics Insulation Resistance: Dielectric strength Between Contact and Coil Between Open Contact Creepage Distance: Shock Ristance: Vabration Resistance: Ambient Temperature: Dust prote

Open the catalog to page 2

Single phase 100A latching relay TP41-30-3

Outline dimensions and circuit diagram Remark: The tolerance didn’t mark on drawings. When dimension is≤1mm,the tolerance should be less than ±0.2mm ; when dimension is between 1-5mm, the tolerance should be less than ±0.3mm; When dimension is ≥5mm, the tolerance should be less than ±0. 5mm. Note: 1. The default status of the relay contact is closed( Reset), it maybe change to “open” due to transit or relay mounting, please check the contact status when using, and reset the relay contact status on request if necessary. 2.In order to make sure the contact “ open” or “closed” status, the excitation...

Open the catalog to page 3