Metal Cabinet BINE Series Distribution Box Surface mounted Flush mounted Metal Consumer Units BEB Series Model Surface model Rush model

Metal Cabinet BYEM Series Distribution Box Application Scope BYEM series distribution system is suitable for circuit of AC 50/60Hz, current up to 125A of distributing control of modem building such as large office mansion, hotel commerce department, industrial and mining enterprises and so on. It is one of the most reliable general distribution systems in the word. Designed for safe, reliable distribution and control of electrical power as service entrance equipment in residential, commercial and light industrial installations. They are available in plug in, din rail designs for indoor and outdoor...

Metal Cabinet Application Scope BME series distribution system is suitable for Circuit of AC 50/60Hz, current up to 125A of distributing control of modern building such as large office mansion, hotel commerce department, industrial and mining enterprises and so o. It can protect electric appliances from over load voltage & current it also can short and frequent switch ON/ OFF under normal operating condition. It is one of the most reliable general distnbution system in the word. Metal Cabinet

Metal Cabinet Surface model Flush model Surface model Rush model Http://www.bolevo.com [email protected]

Metal Cabinet Surface model Hush model Surface model

Metal Cabinet BNIS Series Surface model Triple Phase Http://www.bolevo.com E-mail:irtfo@ bolevo.com 96

Metal Cabinet Surface model Surface model

Metal Cabinet Tnple Phase Http://www.bolevo.com E-mail:info@ bolevo.com

Metal Cabinet BYE Series Product Number

Metal Cabinet Http://www.bolevo.com E-mail:mfo@ bolevo.com 100

Metal Cabinet

Metal Cabinet Single Door Supply include: Enclosure and door Mounting plate Lock system Gland plate,sealing gasket and Fixing accessories Paint finish: epoxy polyester powder coating textured finish, protection degree:IP66 Material: Enclosure &door: sheet steel 1.2mm till size CBED6-820 then 2.0mm Color'RAL7032 Aganst mechanical impacts: IK10 Http://www.bolevo.com E-mail:irtfo@ bolevo.com

Metal Cabinet Stainless Steel Standard configuration: Enclosure and door Mounting Plate Bar lock polyurethane door seal Degree of protection: IP66 Material: body and front door:AISl304 or AISl 316 stainless steel Mounting plate :Galvanized steel

Metal Cabinet BEP Series Plexiglass Door Supply include: Enclosure and door Mounting plate Lock system Gland plate,sealing gasket and Rxing accessories Paint finish:epoxy polyester powder coating textured finish, protection degree: IP55 Http://www.bolevo.com [email protected]

Metal Cabinet BEI / BEI-P Series Model

Metal Cabinet BEF Series Double Door Supply include: Enclosure and door Mounting plate Lock system Gland plate,sealing gasket and Fixing accessories Paint finish:epoxy polyester powder coating textured finish. Protection degree:IP66 Material: Enclosure & door'sheet steel 1.2mm till size CBEF6-820 then 2.0mm Cdor'RAL7032 Against mechanical impacts:IKiO

Metal Cabinet BE6 Series Metal cabinet Frame Front door with reinforcing frame, 4 hinges points lock system Rear panel Top cover mounting plate & 4 mounting plate suppor 4 lifting eyebolts Removable cable gland plate Paint finish epoxy polyester powder coating textured profiEe:Q-fold profile Material:co!d rolling steel Front door:2.0mm Rear panel:! ,5mm Mounting plate:zinc coated 2.5mm protection degree:IP55 Color RAL 7032 RAL 7035 Double door Metal Cabinet Model

Metal Cabinet Metal cabinet BEFK Metal floor standing cabinets comprise a 9-folded profile structure,un-welded at the top and bottom of the frame .with removable screws in vertical profiles for strength and versatility with the cabinets, Thermosettting expoxy polyester powder coating in textured RAL 7035, Components 1 Proltiles components/fmodetF): hinged uprights,panetmounts and locking elements assembled, 2.Top cover and base/(Model:TCB):welded top frame,weldedbase,mounting plate fixing support, 3.Back door and front door (Mode!:F8D):plain door with lock, plain back panel, 4.Mounting plate(ModelMP)...

Metal Cabinet Bote i/o"BE7 Series Model Metal Cabinet Metal cabinet Back and side panels manufactured in 1.5mm sheet steel. Mounting plate manufactured in 2.5mm shtheet steel. Door manufactured in 2mm sheet steel with feinforcing frame. Finish The standard cycle themosetting epoxy polyester powder coating, structure,door RAL 7035 textured finish. Mounting plateizinc coated, protection Degree IP55 en60529 NEMA 12. Supply Include Back and side panelsfstructure) Mounting plate.fAlso available without mounting plate) Supply Include Back and side panelsfstructure) Mounting plate.(Also available without...