Contactor, Thermal Relay & Starter
18Pages

Contactor AC Contactor QJX2(LC1-D) Application_ CJX2 series AC contactors are suitable for frequency 50/60Hz,rated insulation voltage up to 10O0QV rated operation current 9-330A under AC-3 duty.lt is mainly used for making/breaking electric circuits ata long distance & For frequent starting/stopping & controlling AC Motors. It is used in combiation with thermal relay to compose a magnetic motor starter, so. The products accords with such standards as ICE60947-4-1 & GBi 4048.4. Technical Data Voltage range of control coil:(Q.85-1.1)US Technical date of the auxiliary contacts see table 4. table 4 Http://www.bolevo.com E-maikinfo@bolevo.com

Contactor AC Contactor CJX2N Application CJX2N AC contactors are suitable for frequency 50/60Hz,rated insulation voltage up to lOOOv.rated operation current 9-330A under AC-3 duty.lt is mainly used for making/breaking electric circuits ata long distance * for frequent sharting/ stopping*controlling A.C.Motors .It is used in combination with ther mal relay to compose a magnetic motor starter, so.The products accords with such standards as IEC60947-4-1 *GB14048.4. Technical Data Rated operational voltage* rated insulation voltage of the contactor see table 1. table 1 2 Contactor,Thermal Relay...

Bolevo Contactor Contact Block LA1-DNContact Block LA2-D Type AC Contactor Coil LC1-F AS LXl -FF/FQ 2 Contactor,Thermal Relay & Stater Http://www.bolevo.com E-mail:irtfo@ bolevo.com

Contactor AC Contactor LC1-F Application LCl-F series AC contactors are suitable for frequency 50/eoHz, rated insulation voltage up to 1000V, rated operation current 9-150A under AC-3 duly. It is mainly used for making and breaking electric circuits at a long distance & for frequent strarting, stopping & controlling AC Motors. It is used in combination with thrmal relay to compose a magnetic motor starter. The products comply with IEC6047-4.

Note: l .Contactor LCl -Fl 15/4 LCl -F630/4 may be separately provide terminals cover. 2.Contactor device control coils conventional voltage is ac220V and 380V DC Operated AC Contactor LP1-D Series Specifications 2 Contactor,Thermal Relay & Stater Http://www.bolevo.com E-maikinfo@bolevo.com

Mechanical Interlocking AC Contactor LC2-D/F Speclflctions LC2-D50 2 Contactor,Thermal Relay & Stater

Bolci/o Contactor AC Contactor CJX1Application CJXl series AC contactor are suitable in electrical system with AC 50/60Hz, rated operational voltage up to 660V. In AC-3 usage, rated operational voltage up to 380V, rated operational current up to 630A to make or break remote motors or system. They form electromagnetic starters with suitable thermal overload or phase-failure. They are made according to IEC 60947, BS 5424 &VDE 0660. The contactor is a straight motion mechanism having double breaking contacts. The auxiliary contacts are arranged N0.2NC at most, it is employed the flexible...

Bote i/o" Contactor AC Contactor CJX2-K/E Series Application CJX2-K7E series AC contactor is suitable for using in the circuit up to the rate and frequent starting, controlling the AC motor.the addtion of auxiliary contact group to the contactor, dombined with the proper thermal relay,can act to protect the circuit bound to overload. Specifications 2 Contactor,Thermal Relay & Stater

Bote wo” Contactor AC Contactor CJ(16)19 Application CJ(16)19 series changeover capacitor contactor is mainly applicable to a power line of AC 50Hz or QOHz,rated working voltage up to 380V. It is used to put a low voltage parallel connected capacitor in operation or switch it off in a low voltage reactive power compensation device. The contactor is equipped with a surge suppressor, which can effectively reduce the surge current passing through the capacitor at weitching on and supress the over-voltage at switching off. the product is in conformity with the standards IEC947-4-1. 2...

AC Contactor GMCTechnical Specification Type

Bolci/o Thermal Relay New IVpe Thermal Relay LR2-D(JS28N) Application LR2-D(JS28N) thermal overload relays are designed for use with contactors LC1-F115 to LC1-F330. In addition to the protection provided by modeled thermal overload relays JR28, they offer the following special. O Protection against phase imbalance <> Choice of starting class O Protection of unbalanced circuits O Protection of single-phase circuits Differential thermal overload relays for using with fuse Compensated relays manual or automatic reset, with relay trip indicator, for AC. or DC. Relay setting range For using...

Thermal Relay Thermal Relay LR2-D(JS28) Application LR2-D series thermal relay can be used in the circuit of 50Hz or 60Hz, rated insulation voltage 660V, rated current 0.1 -93A for protecting the phase break when the electric motor is overload. The relay has different mechanism and temperature compensation & can be pluged in HC-D series AC contactor, it is the most advanced thermal relay in the nineties in the world. Specificarlons <> Fundamental parameter of the main circuit O Rated insulation voltage 660V <> Rated working current 25.36.93A separately O The regulator seal of rated setting...

Thermal Relay Thermal Relay LR1-D Application LR1 -D series themral relay is suitable for using in the circuits rated voltage up to 600V, rated current 93A AC 50Hz or 60Hz, for over-voltage protection of A.C. motor Thetelay has the defferential mechanism and temperature compensation and can plug ir HCl series A.C, contactor. Motion Cliaracteristic:tliree-Ptiase Balance Motion Time Http://www.bolevo.com E-maikinfo@bolevo.com 2 Contactor,Thermal Relay & Stater

Thermal Relay Thermal Overload Relay TGHApplication The TGH protect the motors overload, locking, open phase (differential) Characteristics O Direct mounting structure O The TOR is mounting directly to the Magnetic Contactors without addition brackets O (Applied model: TGH-22, 40, 85) <> Safety cover O The finger proof safety cover prevent careless touch of electric conductor (Applied mode: TGH-22, 40, 85) <> Separation of power part and operation part O The main circuit and the operation part are separately designed and the operation part is commonly used in TGH-22, 40,85 O Easy operation...