eyc-tech FTM84/85 Industrial Grade High Accuracy Thermal Air Velocity Transmitter
6Pages

{{requestButtons}}

Catalog excerpts

eyc-tech FTM84/85 Industrial Grade High Accuracy Thermal Air Velocity Transmitter - 1

Industrial High Accuracy Thermal Air Velocity Transmitter IP rating : IP67, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Linear calibration air velocity by computer, analog output or RS-485(Optional) High-speed, high-accuracy measurement, quickly respond Thermal mass flow sensor LCD, display air velocity and temperature Switch multifunction physical quantities : [m/s]、[ft/s]、[km/h]、[mph]、[kont] DIP SWITCH and RS-485 function Follow customer needs to plan measuring range, analog output, stations, and zero-point OFF SET or RS-485 adjustment zero-point OFF SET Free programmable software : Data logger / Maximum record 65535 data / Charts Monitor air velocity in supplying gas consumption dry process in industry process / Compressed air consumption measurement / Building / Factory / Clean room / Hospitals / Semiconductor / Electronics / Paper / Printing / Textiles / Steel and iron Industry / Food / Chemical / Pharmaceutical / Biotechnology indu

Open the catalog to page 1
eyc-tech FTM84/85 Industrial Grade High Accuracy Thermal Air Velocity Transmitter - 2

Sensor type Thermal mass flow sensor Measuring range Temp. sensor & measuring range Output Output Power supply Current consumption Overvoltage protection DC : <45 V / AC : <40 V Electrical connection RS-485 or analog : M type ( M12 - 4 PIN connector ) RS-485 + analog : M type ( M12 - 8 PIN connector ) Default output N type ( M16 metal cable gland ) Signal connection Load resistance Response time Installation angle effect Display type Display range *M type with 2 m cable Duct / Remote LCD module with green black light Electrical protection <3% of the measured value (When the installation...

Open the catalog to page 2
eyc-tech FTM84/85 Industrial Grade High Accuracy Thermal Air Velocity Transmitter - 3

| Wind Tunnel Calibration System | The wind tunnel calibration system provides a stable and standardized environment for calibration, is not affected by external factors, and has an automated detection system to greatly improve calibration accuracy and reliability. It follows the operating standards of ISO/IEC 17025 and a calibration report can be purchased separately. Gauge : 4.7mm Length as request M12 connector or M16 metal cable gland

Open the catalog to page 3
eyc-tech FTM84/85 Industrial Grade High Accuracy Thermal Air Velocity Transmitter - 4

N type (M16 metal cable gland) Power supply Brown Black Blue Power supply Power supply Brown Blue Power supply Power supply Brown Black White Blue *Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.

Open the catalog to page 4
eyc-tech FTM84/85 Industrial Grade High Accuracy Thermal Air Velocity Transmitter - 5

| DIP Switch | ONRSN ON Enable / Disable For FTM84 / 85 products, the setting status of DIP switch will be read by software Output type while power on, and this reading action will not happen later on. Thus in order to read the DIP switch status again by software, the user must to reboot again if re-setting the DIP switch. The function of DIP Switch_2 to 8 only be effective while setting the DIP Switch_1 as“On” . Measuring range 1.DIP switch active / deactivate : Set the DIP switch as On/ Off STATUS 2.The type for analog output : Analog output type for Out1 & Out2 OFF 3. Setting the output...

Open the catalog to page 5
eyc-tech FTM84/85 Industrial Grade High Accuracy Thermal Air Velocity Transmitter - 6

| Ordering Guide | Installation Power supply Electrical connector / Option N : Metal cable gland M : M12 connector W : Other request 2 : 2 m cable *M type with 2 m cable W : Other lengths 0 : Analog 1 : RS-485 2 : RS-485 & Analog | Additional Option Test Report | For more detailed information please contact us. ■ILAC / TAF YUDEN-TECH CO.,LTD. Calibration Laboratory - ( ILAC / TAF ) Test report. (TAF accreditation : 3032, complying with ISO / IEC 17025 ) TAF has mutual recognition arrangement with ILAC MRA Project Measurand level or range Measurand level or range

Open the catalog to page 6

All Eyc-tech catalogs and technical brochures