Catalogs >
eyc-tech >
eyc-tech AFMT Average Flow Measuring Tube ( Pitot tube )

eyc-tech AFMT Average Flow Measuring Tube ( Pitot tube )
3Pages

Catalog excerpts

eyc-tech AFMT Average Flow Measuring Tube ( Pitot tube ) - 1

Average Flow Measuring Tube Match with eyc-tech Industrial Diﬀerential Pressure Transmitter Stainless steel housing, high temperature resistant, corrosion resistance, dust resistance, can measure micro ﬂow rates With eyc-tech industrial grade diﬀerential pressure transmitter for air velocity measurement Applied in harsh environments, exhaust gas emission, environmental protection engineering, installation location is not restricted ※Can be customized according to customer needs AFMT and diﬀerential pressure transmitter are often being used in the measurement of ﬂow. With several pressure detecting holes on the AFMT, we can get the average of the ﬂow inside the duct and improve the problem happened in the ﬂow measuring where disturbance occurs when there′s no adequate space inside the straight inlet. AFMT is a probe we inserted into the duct(along with the whole diameter) to measure the ﬂow. When the probe encounters the ﬂow, will sense and get the average total pressure P1 in windward side and static pressure P2 in leeward. AFMT then gets the ﬂow velocity by measuring the diﬀerence between total pressure and static pressure(i.e.) dynamic pressure(ΔP) and ﬂow average velocity(V). Ventilation pipes / Flue industry / Exhaust gas emission / Environmental protection engineering / Air conditioning systems / Vacuum cleaning / Especially high temperature and chimney, wind speed measurement of dusty air and high ﬂow ra

Open the catalog to page 1

eyc-tech AFMT Average Flow Measuring Tube ( Pitot tube ) - 2

Operating pressure Measuring medium Operating temperature Installation Installation Tube type | Air Velocity formula | Flow rate formula Installation connection 4 ... 12″below 3/4″PT movable thread Outlet connection Measuring tube Connection 1/8″G inside thread or 1/4″G inside thread Copper or stainless steel (Optional) Δ P = Diﬀerence between total pressure and static pressure(Dynamic pressure)(Pa) ρ　 = Flow density(kg/m3) K　 = Flow coeﬃcient = Flow coeﬃcient of average ﬂow measuring = Cross-sectional area of duct during operation(m2) = Inﬂation coeﬃcient of liquid

Open the catalog to page 2

eyc-tech AFMT Average Flow Measuring Tube ( Pitot tube ) - 3

| Dimension | Unit：mm Length(L) P1 Outlet connection 1/4″G inside thread Ø20.0 26.0 P1 Outlet connection 1/8″G inside thread Ø14.0 16.0 | Ordering Guide | AFMT Tube type

Open the catalog to page 3