YSTRAL Conti-TDS No. 1 in powder wetting The function of the YSTRAL Conti-TDS: ● The YSTRAL Conti-TDS is based on the principle of an YSTRAL Inline dispersing machine. ● special rotor-stator-system builds up a high vacuum and A inducts powders dust- and loss-free directly into the liquid. Induction of powder, wetting and dispersing – with the YSTRAL Conti-TDS ● The inducted powder immediately becomes dispersed under high shear. Dust- and loss-free powder container emptying, powder transporting and then wetting and dispersing down to a complete des-agglomeration are realised within a single machine – the YSTRAL Conti-TDS. Powders are not only wetted but dispersed into a liquid under vacuum. The formation of agglomerates is avoided. Higher efficiency incorporation of the raw materials and a better quality of the products are the natural result. The combination of processing steps in one machine results in an enormous potential for process rationalising. Production times are minimised Partial processing steps are completely eliminated Cost of production is reduced ● Clean process due to dust- and loss-free powder induction, even for difficult to wet, sticky or dusty powders Induction and dispersing of powders directly from silo (with intermediate buffer), Big Bag, hopper, sack, barrel, etc. ● No adhesion to the vessel or installed components Fast and reproducible adjustment of the products due to an immediate and complete incorporation of the raw materials ● ● No induction of false air – powder transportation under vacuum in the dense phase Technical Data Power 5,5 – 250 kW Voltage 230 / 400 / 500 V, 50 Hz, special voltages possible Speed 1.500 / 3.000 min-1, Infinitely variable speed up to 3.600 min-1 with a frequency converter Dispersing chamber stainless steel 1.4404 (AISI 316 L), special materials, tools exchangeable, fast clamping system Flow rate for liquids 10 - 200 m³/h Induction speed for powders up to 24 t/h Maximal viscosity 200.000 mPas (depending on size and use of the machine) Seal configuration depending on operational conditions Options explosion proof execution, certificati