1. Catalogs
  2. YOKOGAWA Europe
  3. SL1000 High-Speed Data Acquisition Unit

SL1000 High-Speed Data Acquisition Unit

SL1000 High-Speed Data Acquisition Unit

SL1000 High-Speed Data Acquisition Unit

Product catalog summary
Overview: The Yokogawa SL1000 is a high-speed data acquisition unit tailored for electronics and mechatronics applications. It features a maximum sample rate of 100 MS/s with 12-bit resolution and can support up to 128 channels through synchronized operation of multiple units.
Specifications:
  • Maximum sample rate: 100 MS/s (10 ns sampling interval)
  • 12-bit resolution with 20 MHz bandwidth
  • Isolated inputs with up to 1 kV isolation
  • Supports up to 128 channels (16 channels x 8 units)
  • Real-time data streaming via USB 2.0 or 1000BASE-T Ethernet
Features:
  • Fast acquisition and storage capabilities
  • Parallel testing with up to four independent sample rates
  • Real-time waveform analysis and offline computation
  • Intuitive operation with a setup wizard and standard acquisition software
  • Supports a wide range of plug-in modules for various signal types
Applications:
  • Explosion and combustion data acquisition
  • Surge waveform recording and power monitoring
  • Inverter switching waveform observation
  • Environmental testing of ECUs
  • Performance evaluation of large transport systems
Data Management:
  • Data can be saved to internal memory or streamed to a PC hard disk
  • Real-time saving to hard disk with automatic file naming
  • Data link files facilitate batch processing of synchronized data
Modules: The SL1000 supports 13 different ScopeCorder series modules, including high-speed, high-voltage, and temperature modules, allowing for comprehensive data acquisition across various applications.
Additional Specifications:
  • Acceleration Module (701275): High sensitivity range of 1 mV, low noise, supports built-in amp type acceleration sensors with an anti-aliasing filter.
  • Strain Modules (701270 & 701271): Support strain NDIS and DSUB with built-in bridge power supply options and shunt calibration.
  • Frequency Module (720281): Measurement frequency range from 0.01 Hz to 500 kHz with a minimum measurement resolution of 625 ps.
SL1000 High-Speed Data Acquisition Unit:
  • Sampling Rate: Maximum of 100 MS/s with 16 isolated channels.
  • Storage: Built-in 500 GB hard disk with a maximum real-time saving speed of 1.6 MS/s.
  • Connectivity: USB 2.0 and Ethernet 1000 BASE-T compliant.
  • Trigger and Measurement Modes: Supports various trigger modes and measurement groups with independent sample rates.
  • Data Handling: Allows for manual and automatic save conditions, with data conversion options to ASCII or Excel formats.
Accessories and Options: Includes various probes, cables, and adapters for different measurement needs. The document also lists suffix codes for different configurations and options available for the SL1000.
Compliance and Safety: The equipment complies with various international standards and is designed for industrial environments. Users are advised to read the user manual thoroughly for safe operation.
Contact Information: Provides global contact details for Yokogawa's sales and support offices.
See more

Catalog excerpts

SL1000 High-Speed Data Acquisition Unit-1

SL1000 High-Speed Data Acquisition Unit Maximum sample rate Maximum sample rate 100 MS/s12bit Linked Units & Synchronous Operation of Multi-channels

 Open the catalog to page 1
SL1000 High-Speed Data Acquisition Unit-2

Fast Acquisition, Transfer, and S torage Finally, a No-Compromise, High-P erformance Data Acquisition Unit Selecting a data acquisition platform for your electronics or mechatronics application has always been a balancing act. High speed digitizers lack the isolation, attenuation, or bit resolution necessary for power electronics testing. PC-based platforms with fast streaming throughput sacrifice noise immunity, signal conditioning, and hardware integrity. Until now. The Yokogawa SL1000 is the only data acquisition system that delivers independent, isolated channel hardware at 100 MS/s rates,...

 Open the catalog to page 2
SL1000 High-Speed Data Acquisition Unit-3

High-Speed Capture In the pursuit of isolated high-speed waveform measurement, Yokogawa has achieved a maximum sample rate of 100 MS/s (10 ns sampling interval). The SL1000 can accurately capture high-speed and high-voltage phenomena by using the 100 MS/s 12-Bit 20 MHz frequency range 1 kV* Isolation Module (model 720211). Furthermore, you can combine modules that support measurements of a variety of signals, giving you solutions for an extensive range of applications. *: In combination with 702902/700929 Data can be saved to the SL1000’s internal acquisition memory over long durations, or it...

 Open the catalog to page 3
SL1000 High-Speed Data Acquisition Unit-4

Applications Observation of Inverter Switching Waveforms Inverter switching waveforms can be observed using the High-Speed 100 MS/s 12-Bit Isolation Module, offering more accurate waveform capture. Surge Waveform Recording & Power Monitoring You can observe and record waveforms of noise (surge) that is imposed upon power supply and signal lines when the power switch is turned ON and OFF, or due to lightning and other external events. Taking advantage of the SL1000’s high speed, high resolution, isolation, and standalone characteristics, you can check and automatically record voltage waveforms...

 Open the catalog to page 4
SL1000 High-Speed Data Acquisition Unit-5

SL1000 Main Specifications (SL1000 Main Unit) Basic Specifications Input format Plug-in module (A/D converters built in to each unit) Maximum sample rate 1 100 MS/s on all channels Max. recording length (internal memory) 50 MW/ch (trigger mode: Single, measuring on 1 module, 2 channels) Build-in hard disk 500 GB (with /HD1 option) Maximum speed for saving in real time SL1000 Model Number and Suffix Codes Build-in hard disk Signal I/O Probe power terminal USB communication Ethernet General Specifications Rated supply voltage Rated supply frequency Power consumption External dimensions Weight 1.6...

 Open the catalog to page 5

All YOKOGAWA Europe catalogs and technical brochures

  1. YS1500

    20  Pages

  2. UM33A/S006

    2  Pages

  3. YTA610

    20  Pages

  4. FA-M3V

    19  Pages

  5. RAMC

    24  Pages

  6. TB750G EXAxt

    3  Pages

  7. OX400

    2  Pages

  8. MW100

    5  Pages

  9. FieldMate

    5  Pages

  10. AMADAS

    4  Pages

  11. Exapilot

    5  Pages

  12. Exaquantum

    5  Pages

  13. BUCA150_E_050

    4  Pages

  14. BUAQ7280-01

    12  Pages

  15. BUXL120_E_030

    8  Pages

  16. BU7603_00E_060

    20  Pages

  17. BUAQ2200

    8  Pages

  18. Batch Control

    9  Pages

  19. ADMAG Series

    9  Pages

  20. Exaplog

    2  Pages

  21. AAASuite

    2  Pages

  22. InfoWell

    8  Pages

  23. VTSPortal

    2  Pages

  24. U33Q01A01-01E

    11  Pages

  25. BU33K01A01-50E

    11  Pages

  26. CENTUM.VP

    11  Pages

  27. ADMAG AXF

    2  Pages

  28. YTA series

    7  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.