Designed by Yizumi, July 2022 WE WALK ALONGSIDE THE WORLD Two-platen Multi-component Injection Molding Machine Modular design for easy combination Guangdong Yizumi Precision Injection Molding and Die Casting Technology Co., Ltd. Address: No.12, Shunchang Road, Daliang, Shunde, Foshan, Guangdong Province, China 528306 TEL: 86-757-2921 9800 86-757-2921 9001(overseas) Email: [email protected] Disclaimer： 1. Our company reserves the right to improve these products, which are subject to change without prior notice. 2. These pictures are for reference only. The actual products might look slightly different. 3. The data come from Yizumi's factory test. They are for reference only as they might not be the latest data. Please check the data of the actual products

To be the industry's best cost-effective solution provider with leading technology WE WALK ALONGSIDE TEH WORLD Guangdong Yizumi Precision Machinery Co., Ltd. was founded in Guangdong, China in 2002. It has spread its wings all over the world. Specializing in the high polymer material and metal forming industry, YIZUMI has currently established various commercial divisions, namely, injection molding machine, die casting machine, rubber injection machine, high-speed packaging machine and robotic automation system, etc. YIZUMI offers a one-stop solution as an equipment supplier, integrating the functions...

Innovative Manufacturer of high-end multi-component injection molding Based on advanced technology, multi-component molding is available by the combination of injection units. Yizumi MultiPro molding process can help multi-component production by just adding one processing step. Yizumi has been always in leading position in multi-component molding, providing with high-end solution. We Walk Alongside The World Widely used in various industries: Auto grill Auto door panel Auto tail light Auto headlight Auto sunroof Auto interior and exterior trimming Appliance panel Appliance frame Notebook parts...

Vertical turntable Operating principle Horizontal turntable Movable platen Turntable drive Turntable Rotary mold Fixed mold After simultaneous injection by A unit and B unit, the product is ejected. Then the turntable rotates vertically by 180 degrees and the mold is closed for next-round injection. When the mold is finally opened, the molding process of two stations is completed. The rotary degree of turntable is set at 180 degrees in forward and reverse direction. Station exchange can be achieved by rotating the turntable vertically. Good compatibity and mature mold technology, with wider application....

P type combination for two-color molding • Description: Parallel combination for two-color molding • Feature : It is suitable for short nozzle center distance. The nozzle center distance is adjustable. The injection unit can be moved for centering. V type combination for two-color molding • Description: Vertical combination for two-color molding • Feature: It is suitable for the production of multi-component products requiring less injection volume. D1M Series Two-platen Multi-component IMM D1M Series Two-platen Multi-component IMM Injection unit Screw UN500D1M Specification of H type injection...

Vertical Turntable+W Type CombinationW type combination for two-color molding • Description: Piggyback combination for two-color molding • Feature: It is suitable for the production of multi-component products requiring highly space-saving. Specification of H type injection unit is the same as that of D1 injection unit. t6 All the data herein come from Yizumi's factory. Please check the data of the actual customized equipment. t6 All the data herein come from Yizumi's factory. Please check the data of the actual customized equipment.

Vertical Turntable+W-V Type Combination L type combination for two-color molding W-V type combination for three-color molding D1M Series Two-platen Multi-component IMM Injection unit Screw L type injection unit Injection unit Screw V type injection unit Specification of H type injection unit is the same as that of D1 injection unit. Specification of main and secondary injection unit is the same as that of H+W combination. The specification of V type injection unit, please refer to this table. DPM Series Two-platen Multi-component IMM DPM Series Two-platen Multi-component IMM Injection unit Screw...

Vertical Turntable+P-P Type Combination P-L type combination for three-color molding • Description: Parallel/L-shaped combination for three-color molding • Combination: H+P+L • Feature: Flexible configuration and wide application. P-P type combination for three-color molding • Description: Two set of parallel combination for four-color molding • Feature: Support customization as per demand. D1M Series Two-platen Multi-component IMM D1M Series Two-platen Multi-component IMM Please contact for the specific combination. DPM Series Two-platen Multi-component IMM DPM Series Two-platen Multi-component...

Two-way injection for two-color molding • Description: Horizontal two-way injection molding • Feature: It is suitable for the production of large multi-compo nent products, innovative application with horizontal turntable. th All the data herein come from Yizumi's factory. Please check the data of the actual customized equipment.

Vertical turntable injection molding machine Injection unit ① Proportional valve-controlled back pressure Precise control to enhance injection stability and provide necessary conditions for excellent plasticizing effect. ② New-generation PID temperature control ④ Single cylinder injection structure ⑤ Modular combination design ⑥ Adjustable nozzle center distance According to the process requirement of different products, injection units can be combined flexibly, with various software functions, making customization achievable. ⑦ High mixing anti-stick screw design Screw design with optimized mixing...

Vertical turntable injection molding machine Clamping unit Integrated turntable • Integrated design, high rigidity, large bearing capacity and compact structure; • The turntable is standard with servo motor with high precision and rotation speed. It can be equipped with multiple groups of water-oil-gas diversion systems at high flow ® Digital closed-loop positioning control technology (DCPC) • Turntable driven by servo motor is controlled by DCPC technology, with high rotating speed, smooth operation without impact, accurate positioning and repeatability up to ±0.005°. • Improve the repeatability...