TC/TCR Series High performance CNC Lathes
26Pages

{{requestButtons}}

Catalog excerpts

TC/TCR Series High performance CNC Lathes - 2

HEADQUARTERS : 888, HOMU RD., HSINCHUANG SHENKANG, TAICHUNG, TAIWANTEL : 886-4-25623211 FAX : 886-4-25626479 . 886-4-25628399SERVICE TEL : 886-4-25612965 FAX : 886-4-25612966E-mail : sales@SUPERMAX.com.tw Web site http://www.SUPERMAX.com.tw >

Open the catalog to page 2
TC/TCR Series High performance CNC Lathes - 4

The utmost performance CNC lathes are specially developed for mass turning production industries, like in the automobile, aerospace, oil and IT electronic industries. The Yeong Chin Turning Centers provide the best solution in various and complex parts production; it is a high value added machine tools for key component output. Modular spindle designs suit various turning application. The rigid one-piece Meehanite casting absorbs the turning vibration and ensures the job accuracy. Powerful tool turret system indexes quick and reliable for high efficiency production. High-speed axial...

Open the catalog to page 4
TC/TCR Series High performance CNC Lathes - 7

The tail stock quill is actuated by program M command, tail stock body is easily positioned manually.The tail stock incorporates a quill with a large diameter of 75mm 2.95" and MT-4 live center that provides a maximum thrust of 450kgf 992lb at maximum hydraulic pressure of 30kg/cm > 2 426.7 PSi. > Linear motion guideways, and a large 40mm 1.57" diameter Z axis ball screw allow rapid feed rate at 30m/min 1181 ipm.Precision ground ball screws and pitch error compensation insure precise positioning. > The 2-speed transmission gear-box achieves full power output at 385rpm of 27.9kg-m 202lb-ft...

Open the catalog to page 7
TC/TCR Series High performance CNC Lathes - 8

TC-26 Series TCR-26 Seri es High Speed Spindle at 4000rpm Maximun. Servo Driven Live Tool Turret of Quick & Reliable Index Time at 0.6 sec. for each adjacent tool. Rapid Feed Rate at X 15m/min 591 ipm Z 20m/min 787 ipm . Extremely Rigid One-piece 45 Slant Bed. Heavy Cutting With Powerful Gear Hend Spindle for Maximum Torque Output at 74.5kg-m 539 lb-ft. Material Removal Efficiency at 410c.c./min. Insert Depth at 8mm 0.31". TC-26 SeriesHigh-Speed And High-Rigidity Turret > The 12-station turret index is done by absolute detection, and no tool selection mistake is caused.The powerful turret...

Open the catalog to page 8
TC/TCR Series High performance CNC Lathes - 9

Using "M' code commands the quill stroke of the programmable tail stock, which can be hooked with a hydraulic hook to the saddle carriage and slide along the Z-axis stroke. > X, Z axes guide ways are well hardened and ground with Turcite-B design that will reduce the friction and offer utmost rigidity in cutting. The rapid feed of X:15m/min 591 ipm ; Z : 20m/min 787ipm. > 8mm Hydraulic gauges and control values of chuck and tail stock, and the central lubrication system are installed at the front side; easily operated and maintained. > This machine is equipped with high precision ball...

Open the catalog to page 9
TC/TCR Series High performance CNC Lathes - 11

This machine is equipped with high precision ball screws and connected with motor directly. Both fixing design supports ends; also the ball screws are pre-loaded with high rigidity, high precision, low heat effect and without backlash. > The oil tank is separated from the machine body that ensures the machining precision not affected by heat. It is also convenient with time efficiency to clean and maintain the oil tank. > Hydraulic gauges and control values of chuck and tail stock, and the central lubrication system are installed at the front side; easily operated and maintained. > Using...

Open the catalog to page 11
TC/TCR Series High performance CNC Lathes - 24

ITEMS MODELTC-15TC-15CHUCK Diameter6" CHUCK8" CHUCKMACHINING CAPACITY Swing Over Bed mm inch ٸ450 ٸ17.72Swing Over Carriage mm inch ٸ310 ٸ12.20Max. Turning Diameter mm inch ٸ250 9.84Max. Turning Length mm inch8T: 466, 12T: 4688T: 18.35, 12T: 18.438T: 447 , 12T: 4498T: 17.60, 12T: 17.68Distance Between Center mm inch670 26.38 SPINDLE Spindle NoseA2-5A2-6Spindle SpeedStd. rpm50~600045~4000Opt. rpmL: 50~192~1538,H: 95~751~6000L: 60~150~1205,H: 225~590~4000 Hole Through spindle/ Hole Through draw bar mm inch 虸56 / 45 虸2.20 / 1.77 虸62 / 52 2.44 / 踸2.05Spindle Motor, C-Axis MotorkW HP5.5 / 7.5 /...

Open the catalog to page 24

All YCM (Yeong Chin) catalogs and technical brochures

  1. FP Series

    12 Pages

  2. TV Series

    18 Pages

  3. NSV Series

    15 Pages

  4. NXV Series

    10 Pages

  5. NH 800B

    6 Pages

  6. H series

    16 Pages

  7. NDC series

    8 Pages

  8. TC series

    14 Pages

  9. GT series

    32 Pages

  10. NH 450A

    5 Pages

  11. H630B

    18 Pages

  12. FX380A

    16 Pages

  13. NH Series

    6 Pages

  14. DCV series

    10 Pages

  15. FV-50T

    8 Pages

  16. WV series

    6 Pages

  17. MV series

    12 Pages

Archived catalogs

  1. NSV

    6 Pages