Note: The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference. YEONG CHIN MACHINERY INDUSTRIES CO., LTD. No. 888, Sec. 1, Homu Road, Shengang District, Taichung 42953, Taiwan Tel : +886-4-2562-3211 ■ Fax: +886-4-

High Speed, High Accuracy, High Performance - Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force. 直結式傳動 -1Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation. - Ceramic bearings features low inertia mass, low centrifugal force, high rigidity 馬達與主軸直接連結沒有皮帶或齒輪驅動造成的噪音、背隙 Rapid Feedrate Acceleration Enhancement Auto Tool Change Time Tool Magazine Capacity and low coefficient of thermal deformation. 及振動問題。 - High precision helical springs features high dynamic balance and low vibration. 2 - Grease lubrication...

POWER CHART POWER CHART ▪ FANUC System 6,000rpm ▪ FANUC System 6,000rpm ▪ FANUC System 10,000rpm ▪ FANUC System 10,000rpm OPTIONAL OPTIONAL STANDARD STANDARD STANDARD STANDARD lb-ft kgf-m lb-ft kgf-m STANDARD STANDARD ▪ HEIDENHAIN System 12,000rpm ▪ HEIDENHAIN System 12,000rpm ▪ FANUC System 12,000rpm ▪ FANUC System 12,000rpm STANDARD STANDARD STANDARD STANDARD lb-ft kgf-m lb-ft kgf-m lb-ft kgf-m ▪ HEIDENHAIN System 15,000rpm ▪ HEIDENHAIN System 15,000rpm OPTIONAL OPTIONAL lb-ft kgf-m lb-ft kgf-m OPTIONAL OPTIONAL OPTIONAL OPTIONAL STANDARD STANDARD 15,000rpm 15,000rpm ▪ FANUC System ▪ FANUC...

Wind source inlet *All values shown above are measured for the machine in good air-conditioned environments. Heat Exchanger Rapid Feedrate Electrical cabinet Power source port Hole Pattern Machine Weight Table Load Capacity 12.1" 560 Distance Between22.05" Spindle Nose and Table Top Power Consumption (Ttansformer) Model Pallet Size ▪ Screw hole 2,740 107.9" Max. height The NXV 560A high speed high power vertical machining center is specially designed for precision manufacturing and high productivity machining industries such as auto parts, high precision aerospac

Tool Spindle Speed Feedrate Width of Cut TAP High Performance Vertical Machining Center Tapping (Max.) Tool Tool Spindle Speed Spindle Speed Feedrate Feedrate Width of Cut Width Depth of Cut Tool M24 x 3P x 6T ø34mm Tool ø63mm Tool Tool Spindle Speed 80rpm Spindle Speed 1,500rpm 1,500rpm Spindle Speed Spindle Speed Feedrate 240mm/min. Feedrate Feedrate 2,700mm/min. 225mm/min. Feedrate Width of Cut 60mm Depth of Cut 30mm Depth of Cut 2.7mm RIGID TAP A6061 Aluminum S45C Steel TAP (Min.) Tapping Tool M1.2 x P0.25 Tool M1.2 x P0.25 M24 x 3P Tool 12,000rpm M24 x 3P 80rpm Spindle Speed 1,200rpm Speed...

20 bar Pump (opt.) Spindle Cooling 00 System (opt.) R5 . 7 " 19 Dual wall structure saddle providing high rigidity. (Open Door) High rigidity and high loading roller type linear guideways NXV1380A : 1,430 56.3" applied on NXV1680A : 1,730 68.1" the three axes. Chip Auger (Open Door) Penta chip augers (4 Y-axial +1 X-axial) ensure fluent chip NXV1380A 1,430 removal prevent ::chips56.3" piling up. from NXV1680A 1,730 68.1" Chip Conveyor Coolant Chip Auger Tank (Opt.) Coolant Tank 1,500 59" Pretension ballscrews applied on the three axes increase axial rigidity providing less thermal deformation....

20 bar Pump (opt.) Spindle Cooling 00 System (opt.) R5 . 7 " 19 prevent chips from piling up. Coolant Tank Chip Auger Foot pedals ■ Quad-Chip auger system ensure fluent chip removal 10.6" Chip Conveyor 268 (opt.) 20 bar Pump (opt.) The NXV 1680B high rigidity vertical machining center offers extended travels at an affordable price. It is most suitable for automotive and aerospace applications. 3,075 121.1" m x Tool 5T pm e Speed mm/min. Feedrate h of Cut m of Cut h ø80mm x 5T 刀具 ø59mm 主軸轉速 600rpm Tool 1,160rpm Spindle進給率 Speed 450mm/min. 切削寬度 116mm/min. Feedrate 60mm Depth 50mm of Cut ø80mm x...

CHIP REMOVAL SYSTEM Tool Spindle Speed Feedrate Width of Cut S45C Steel FACE MILL 5mm x 8T Tool rpm pindle Speed 00mm/min. Feedrate mm Width of Cut mm Depth of Cut 切削深度 Cutter Diameter S45C Steel FACE MILL ø125mm x 8T 主軸轉速 Tool 375rpm 進給率 Spindle Speed 1,800mm/min. 切削寬度 120mm Feedrate Depth of Cut 3.5mm ■ Quad-Chip Auger System ■ Quad-Chip Auger with Rear Side Chip Conveyor (opt.) Tool ø160mm x 10T Spindle Speed 375rpm Feedrate 375mm/min. of Cut Width 125mm Depth of Cut ø125mm x 8T Tool 375rpm Speed Spindle 1,800mm/min. Feedrate 120mm of Cut Width 3.5mm Depth of Cut ø160mm x 10T 刀具 主軸轉速 375rpm...

High Response AC Digital Servo & Spindle Drives with High Definition Software Enhancement Exclusively from AICC II High Speed High Accuracy with Manual / Auto Switching on/off Machining JERK Control Function (opt.) Pre-machining Preparation High Rigidity Tapping, Helical Interpolation Intelligent Tool Data Management Comprehensive tool data management function allows operators to monitor and manage all positions in tool magazine Custom Marco B and Tool Path Graphics Manual Guide i with large Screen Display . Tool Length Measurement Graphic measuring interface provides automatic tool length measurement...

The new CNC-controller for the compact class. The performance of the SINUMERIK 828D is in a class of its own. Even in the compact frame size, the familiar SINUMERIK state-of-the-art technology ensures the highest possible levels of precision and productivity. Communicative Front interfaces (IP65) • RJ45 Ethernet • USB 2.0 • Compact Flash (CF) card 2 Heavy-duty Panel front made of die-cast magnesium 3 Optimum readability 10.4“ TFT color display Outstanding performance Two versions with different performance capabilities • PPU 260/261 • PPU 280/281 User-friendly • Fully fledged QWERTY keyboard...