Catalog for P7 Drives for Industrial Applications
80Pages

{{requestButtons}}

Catalog excerpts

Catalog for P7 Drives for Industrial Applications - 1

P7 Drives for Industrial Automation

Open the catalog to page 1
Catalog for P7 Drives for Industrial Applications - 3

CA.P7.01, 01/26/11 Data subject to change without notice Yaskawa America, Inc.

Open the catalog to page 3
Catalog for P7 Drives for Industrial Applications - 4

This catalog may describe trademarked equipment, which is the property of other companies. These trademarks are the property of the registered owner companies and may include the following: DeviceNetTM, trademark of ODVA. Profibus®, trademark of PROFIBUS International Modbus®, trademark of Schneider Automation, Inc. Other Documents and Manuals are available to support special use or installation of this product. These documents may be provided with the product or upon request. Contact Yaskawa Electric America, Inc. or visit www.yaskawa.com, as required. Documents may include the following:...

Open the catalog to page 4
Catalog for P7 Drives for Industrial Applications - 5

For industrial applications such as centrifugal fans and pumps, the P7 drive is an ideal choice. The drive is provided in Normal Duty ratings with 110% overload capability. V/f control mode, network communication options, and an array of input/output options are available. This drive is designed for tough industrial environments. It is rugged and reliable, with an MTBF of 28 years. A variety of enclosure options provide the right environmental protection. Providing the right power requirements is also easy with 208/240 and 480 volt ratings, built-in bus choke above 30 HP, common bus...

Open the catalog to page 5
Catalog for P7 Drives for Industrial Applications - 6

Standard Drives P7 Drives - 5-500HP, 208-230/240 and 480V, 3-phase(1) input, NEMA 1 or protected chassis enclosure Rated Input Voltage Drive Model Number Rated Output Current CIMR-P7U (Amps) Standard Enclosure Drive List Price $ NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 Protected Chassis Protected Chassis Protected Chassis NEMA 1 NEMA 1 NEMA 1 NEMA 1 Protected Chassis Protected Chassis Protected Chassis Protected Chassis (1) For single-phase input applications, consult Yaskawa Drives Applications Engineering for proper sizing (2) Horsepower rating is based on standard NEMA B 4-pole motor design as...

Open the catalog to page 6
Catalog for P7 Drives for Industrial Applications - 7

Standard Drives P7 Drives (Continued) Rated Input Voltage Drive Model Number Rated Output Current CIMR-P7U (Amps) Standard Enclosure Drive List Price $ NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 NEMA 1 Protected Chassis Protected Chassis Protected Chassis Protected Chassis Protected Chassis Protected Chassis (1) For single-phase input applications, consult Yaskawa Drives Applications Engineering for proper sizing (2) Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors (3) Check...

Open the catalog to page 7
Catalog for P7 Drives for Industrial Applications - 8

P7 Ring Kit - These kits allow installation of the drive into a customer's enclosure with the heatsink mounted out the back to reduce overall enclosure size. Each kit includes all of the necessary components, including hardware and instructions. Drive Model Number CIMR-P7U Rated Input Voltage CA.P7.01, 01/26/11 Data subject to change without notice Yaskawa America, Inc.

Open the catalog to page 8
Catalog for P7 Drives for Industrial Applications - 9

End Cap Kit, NEMA 1 - This option consists of a top and bottom cover to convert a protected chassis drive to a NEMA 1 enclosed unit. This option DOES NOT provide additional space for mounting auxilliary components (i.e. circuit breaker, input fuses, reactor, etc.). Overall Drive Dimensions Rated Input Voltage Drive Model Number CIMR-P7U CA.P7.01, 01/26/11 Data subject to change without notice Yaskawa America, Inc.

Open the catalog to page 9
Catalog for P7 Drives for Industrial Applications - 10

Reactor Options P7 Reactor, 3% and 5% Impedance - May be used on either the input or output of a drive to reduce the effect of load or line side transients on the drive. The three-phase reactors are provided in a separate NEMA 1 enclosure. 3% Enclosed Reactor Rated Output Current (Amps) Rated Input Voltage Drive Model Number CIMR-P7U List Part Number Price 05P00620$ (1) Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors CA.P7.01, 01/26/11 Data subject to change without notice Yaskawa...

Open the catalog to page 10
Catalog for P7 Drives for Industrial Applications - 11

Reactor Options Reactor, 3% and 5% Impedance (continued for 480V) 3% Enclosed Reactor Rated Input Voltage Drive Model Number CIMR-P7U Rated Output Current (Amps) Dimensions (in.) Part Number 05P00620- (1) Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors CA.P7.01, 01/26/11 Data subject to change without notice Yaskawa America, Inc.

Open the catalog to page 11
Catalog for P7 Drives for Industrial Applications - 12

Control Options P7 Control Options - These cards, cables and devices add control functionality to the standard drive. Items are shipped loose, unmounted. See Configured Section for factory mounted and wired control. Analog Input Options Digital Input Options Digital Operator Options CA.P7.01, 01/26/11 Data subject to change without notice Yaskawa America, Inc.

Open the catalog to page 12
Catalog for P7 Drives for Industrial Applications - 13

Communications Options LonWorks. This option is compatible with the Lon Mark Interoperability Association and complies with the Functional Profile for a Variable Frequency Motor Drive. The option board features the FFT-10A Free Topology Twisted-Pair Transceiver. Network connectivity is facilitated by either a Phoenix-style screw termination or RJ-45 connector. The kit includes a 12-inch pigtail (UWR005671) for interface wiring of the phoenix terminal block. Optional longer pigtail assemblies are available for use when drive is mounted within another enclosure. The 20-inch cable is for wall...

Open the catalog to page 13
Catalog for P7 Drives for Industrial Applications - 14

Rated Input Voltage Drive Model Number CIMR-P7U Rated Output Current (Amps) Standard Enclosure Protected Chassis Dimension Drawing Number Protected Chassis Protected Chassis Protected Chassis Heat Loss (watts) (1) Horsepower rating is based on standard NEMA B 4-pole motor design as represented in NEC table 430.150 Full-Load Current, Three-Phase Alternating Current Motors (2) This data represents the drive weight only, not shipping weight. (3) Please refer to Yaskawa’s website at www.yaskawa.com for dimension drawings. (4) Total Heat Loss is the amount of heat dissipated by the drive at full...

Open the catalog to page 14
Catalog for P7 Drives for Industrial Applications - 15

Description 5-500HP P7/Configured NEMA 1/12 FVFF The P7/Configured package provides a P7 in a NEMA 1 or NEMA 12 FVFF enclosure, with space for several commonly used options, such as reactors, RFI filters, circuit breakers, etc. The P7 and P7/Configured have been designed for flexibility in providing the features and options commonly demanded by facility designers. The P7 Drive is a variable torque AC drive, designed specifically for industrial applications. A new benchmark for size, cost, performance, benefits and quality, the P7 includes numerous built-in features such as Network...

Open the catalog to page 15

All Yaskawa America catalogs and technical brochures

  1. R1000

    11 Pages

  2. FP605

    15 Pages

  3. iQrise

    2 Pages

  4. HV600

    19 Pages

  5. D1000

    2 Pages

  6. GA500

    9 Pages

  7. Sigma SD

    60 Pages

  8. GA800

    2 Pages

  9. L1000A

    2 Pages

  10. Deming Award

    2 Pages

  11. Z1000 Bypass

    2 Pages

  12. MP3200iec

    2 Pages

  13. P1000 Catalog

    52 Pages

  14. SGMMV

    20 Pages

  15. Bestact

    64 Pages

  16. A1000 Catalog

    58 Pages

  17. YASNAC 3000G

    203 Pages

  18. YASNAG 2000G

    58 Pages

Archived catalogs