Ultrex Plus
1Pages

{{requestButtons}}

Catalog excerpts

Ultrex Plus - 1

ULTREX PLUS.. Ultrex Plus is a double braid of Ultra High Molecular Weight Polyethylene, treated with Maxijacket coating for enhanced toughness. Sleeved with high tenacity polyester, Ultrex Plus is spliceable utilizing conventional high modulus splice techniques, or the new Yale tuck splice, which shortens the bury portion and minimizes the length of the larger diameter associated with a bury type splice. All strengths shown are for spliced line. Average Spliced Break Strength* Minimum Spliced Break Strength* * Knots and abrupt bends significantly reduce the strength of all ropes and lowers maximum working load. ** Working load is based on static or moderately dynamic lifting/pulling operations. Instantaneous changes in load up or down, in excess of 10 percent of the rope's rated working load constitutes hazardous shock load and would void normal working load recommendation. Consult Yale Cordage for guidelines for working loads and safe use of rope. Energy Absorption The colored area under the curve represents the rope's energy-absorption capability. ■ Green working 140 ft. lbs./lb. Dielectric Strength: The maximum allowable leakage for clean, dry Ultrex Plus is 100 Micro Amperes when tested Production Test". Absorbed and entrained moisture or impurities will increase ropes conductivity dramatically. Splice using Yale's splicing technique technique document #10018007 (video) ■■■^■i Maximum Working Load m^^m Minimum Break Strength ^^■^M Average Break Strength

Open the catalog to page 1

All Yale Cordage catalogs and technical brochures

  1. Yalon

    1 Pages

  2. Aracom T

    1 Pages

  3. Crystalyne

    1 Pages

  4. Polydyne

    1 Pages

  5. Tech-Kern™

    1 Pages

  6. PolyPlus

    1 Pages