Innovative Service Around the Globe YAGEO DATA SHEET CURRBfTSENSOR -LOWTCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512 RoHS compliant & Halogen free

Phfcomp Chip Resistor Surface Mount I pt I series | 0402/0603/0805/1206/2010/2512 Product specification This specification describes PT series current sensor - low TCR and high power with lead-free terminations made by thick film process. APPLICATIONS • Converters • Printer equipment • server board • Telecom • Consumer electronics • Car electronics FEATURES • AEC-Q200 qualified • Halogen Free Epoxy • RoHs compliant • Reduce environmentally • High component and equipment reliability • Non-forbidden material used in products/production • Low resistances applied to current sensing • Moisture sensitivity...

Product specification Chip Resistor Surface Mount E-24 series / Non-E series (R= 250/400/500 mΩ): 3 digits Fig. 2 Value = 220 mΩ The “R” is used as a decimal point; the other 2 digits are significant. E-24 series / Non-E series (R= 250/400/500 mΩ): 4 digits The “R” is used as a decimal point; the other 3 digits are significant. For further marking information, please refer to data sheet “Chip resistors marking”. CONSTRUCTION The resistors are constructed out of a high-grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive paste. The composition of the...

Phfcomp Chip Resistor Surface Mount I pt I series | 0402/0603/0805/1206/2010/2512 Product specification DIMENSIONS Table 1 TYPE L (mm)_W (mm) Nats: For resistance range: 75mQ = R < 91 mQ For dimensions, please refer to Table 1 Side view for all type Fig. 6 Chip resistor dimensions

Phfcomp Chip Resistor Surface Mount I pt I series | 0402/0603/0805/1206/2010/2512 Product specification ELECTRICAL CHARACTERISTICS Table 2 ±600ppm/°C Max resistance I0mQ Rated current 3A ±300ppm/ C ±200ppm/°C

Phfcomp Chip Resistor Surface Mount I pt I series | 0402/0603/0805/1206/2010/2512 Product specification FOOTPRINT AND SOLDERING PROFILES Recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting ”. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE REEL PT0402 PT0603 PT0805 PT1206 PT2010 PT2512 NOTE 1. For paper/embossed tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”. FUNCTIONAL DESCRIPTION OPERATING TEMPERATURE RANGE Range: -55 °C to +155 °C POWER...

Phfcomp Chip Resistor Surface Mount I pt I series | 0402/0603/0805/1206/2010/2512 Product specification TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST _TEST METHODPROCEDUREREQUIREMENTS Temperature MIL-STD-202 Method 304 At +25/+I25 °C Refer to table 2 Coefficient of Resistance (T.C.R.) Formula: R2—R| T.C.R=-x |06 (ppm/°C) Where tI=+25 °C or specified room temperature t2=+125 °C test temperature R| =resistance at reference temperature in ohms R2=resistance at test temperature in ohms Life/ Endurance MIL-STD-202 Method 108A | ,000 hours at 70+2 °C applied...

Phfcomp Chip Resistor Surface Mount I pt I series | 0402/0603/0805/1206/2010/2512 Product specification TEST_TEST METHOD PT standard power: 2.5 times rated voltage for 5 sec at room temperature PT high power: 5 times rated power for 5 sec at room temperature PT jumper: 2.5 times rated current for 5 sec at room temperature REQUIREMENTS ± (1.0%+0.0005 Q) No visible damage Board Flex/ IEC 60115-1 4.33 Device mounted on PCB test board as ± (1.0%+0.0005 Q) described, only I board bending required No visible damage Bending for 0402: 5 mm 0603/0805: 3 mm 1206 and above: 2 mm Holding time: minimum...

Phfcomp Chip Resistor Surface Mount I pt I series | 0402/0603/0805/1206/2010/2512 Product specification REVISION HISTORYREVISION DATE_CHANGE NOTIFICATION DESCRIPTION_ Version 2 May 24, 2018 - - Update PT0603 7T coding - Extend resistor value Version 0 Aug. 21, 2014 - - New datasheet for current sensor - low TCR PT series sizes of " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products Itself are unchanged. Any product change will be announced by PCN.”